755875
53
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISH
54
SPECIAL SETTINGS ----------------------------------------------------------------------------------------------------------
Expert mode
You can restrict the antenna's range or reset
the antenna.
1 Select the line »Installer Mode« with »
V
« or
»
Λ
« and press »« to confirm.
The »INSTALLER MODE« menu appears.
2 Select the preferred option with »
V
«
or »
Λ
«.
»Limit Position«: Defines the range in
which the antenna may move. Use »
<
«
to set the western limit, use »
>
« to set the
eastern limit.
»Move Motor«: Aligns the antenna with
the selected satellite. Use »
<
« to align the
antenna to »west«, use »
>
« to align the
antenna to »east«.
»Go To Stored Position«: Press »« to save
the current antenna alignment.
»Store Stored Position«: Aligns the antenna
with the reference point of the positioner.
»Reset DiSEqC 1.2 Limit«: Resets the limit
position of the antenna.
Searching for television chan-
nels from the cable provider
automatically
1 Open the menu with »i«.
2 Select the line »SOURCE SETUP« with »
V
«
or »
Λ
« and press »« to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
V
«
or »
Λ
« and press »« to confirm.
Select the option »Cable« with »
<
«, »
>
«,
»
V
« or »
Λ
« and press »« to confirm.
4 Select the line »Automatic Channel Scan«
with »
V
« or »
Λ
« and press »« to confirm.
The menu appears.
5 Select the line »Countr with »
V
« or »
Λ
«
and press »« to confirm. In the country se-
lection menu, select the country with »
<
«, »
>
«,
»
V
« or »
Λ
« and press »« to confirm.
6 Select the line »Scan Typ« with »
V
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
7 Select the line »Cable Scan Type« with »
V
«
or »
Λ
« and set the option »Quicor »Full«
with »
<
« or »
>
«.
The search function »Quick« sets the chan-
nels according to the information provided
by your cable provide in the transmission
signal.
If the option »Full« is selected, the entire fre-
quency range will be scanned. The search
can take a long time with this option. This
option is recommended if your cable pro-
vider does not support the search type
»Quick«
.
Note:
7 You can accelerate the search. To do this,
you need information about the frequency
and
network ID. You are usually able to get
this data from your cable operator or find it
in forums on the Internet. For example, the
frequency 402MHz and network ID 61441
can be entered for Germany.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 40VLE8042S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 40VLE8042S in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 40VLE8042S

Grundig 40VLE8042S User Manual - German - 63 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info