406652

Grundig 350 ocean boy Manual

8
Zoom out
Zoom in
Previous page
1/11
Next page
Setting the clock time
• While the time is being displayed, press the
MODE button and hold it pressed, until the
time indication starts flashing.
• Use the – button to set the hours and the +
button to set the minutes.
– A single press of the – or + button advances the setting by
1 hour or 1 minute respectively. If the button is held pressed,
the setting advances rapidly.
– The minutes will not be carried over to the hours if, for
example, the minutes indication changes from '59' to '00'.
• Press the MODE button once more to store the setting.
– If no button is pressed within 5 seconds, the time setting
mode stops and the setting is stored automatically.
Setting the alarm time
• Press the MODE button briefly until the
display shows the current alarm time.
–
The alarm indicator 'ʍ' flashes on the display.
• While the alarm time is being indicated,
press and hold down the MODE button until
the
alarm time indication starts flashing.
•
Use the – button to set the hours and the +
button to set the
minutes (in the same way as the clock time).
• Press the MODE button once more to store the setting.
– If no button is pressed within 5 seconds, the alarm time
setting mode stops and the setting is stored automatically.
OB 350 page 14
14
CLOCK ALARM
GB
Switching the alarm on
• Press the ALARM OFF button once until the
alarm indicator '
ʍ' appears steadily on the
display.
• Select the desired alarm mode (with radio or
with sound signal) with the switch RADIO/BUZZ.
• If you select alarm with radio, tune to a station which will
be broadcasting at the alarm time and adjust the volume to
the required level.
– At the preselected alarm time, the alarm will switch on and
switch off again automatically 90 minutes later.
Interrupting and repeating the alarm
• The alarm can be interrupted with the SNOOZE button.
– After 5 minutes, the alarm comes on again.
• It is possible to interrupt the alarm function several times
during the switch-on period.
Switching the alarm off
• The alarm function can be switched off by pressing the y or
ALARM OFF button.
The alarm remains set to operate the next day.
• If you wish to switch off the alarm completely, press the
ALARM OFF button briefly, until the alarm indicator '
ʍ'
disappears.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 350 ocean boy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 350 ocean boy in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 350 ocean boy

Grundig 350 ocean boy User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info