569946
51
Zoom out
Zoom in
Previous page
1/60
Next page
51
ENGLISH
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
DiSEqC 1.2 Settings
You can adjust the alignment of the satellite an-
tenna to each individual satellite. These settings
will be saved so that the antenna can later be
easily guided to each saved alignment.
1 Select the line »DiSEqC 1.2 SETTINGS« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »DiSEqC 1.2 SETTINGS« menu ap-
pears.
2 Select the preferred option with »
V
«
or »
Λ
«.
»Transponder«: »Press
OK
«, select the
transponder from which the signal is being
received with »
<
«, »
>
«, »
V
« or »
Λ
« and
press
»OK«
to confirm.
»Moving Mode«: Use »
<
« or »
>
« to select
the option »Discrete« or »Continuous«.
»Discrete«: Moves the antenna in
defined steps to the west and the east.
»Continuous«: Moves the antenna to the
west or east continuously.
»Step Size«: Use »
<
« or »
>
« to select the
number of steps with which the antenna
should turn. »Step Size« is only active
when the »Transport Mode« was set to
»Discrete«.
»Move Motor«: Aligns the antenna with
the selected satellite. Use »
<
« to align it to
»West«, use »
>
« to align it to »East«.
»Go To Stored Position«: Aligns the antenna
to a saved satellite position. Up to 50 posi-
tions can be saved. »Press
OK
« and then
select the saved position with »
<
« or »
>
«.
Press »

« (green) to confirm the anten-
na will be aligned with the saved position.
»Store Stored Position«: The current anten-
na alignment is saved.
»Limit Position«: Defines the range in
which the antenna may move. Use »
<
«
to set the western limit, use »
>
« to set the
eastern limit.
»Reset DiSEqC 1.2 Limit«: Resets the limit
position of the antenna.
3 Press »EXIT« to end the setting.
Searching for television chan-
nels from the cable provider
automatically
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
»
V
« or »
Λ
« and press
»OK«
to confirm.
The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
V
«
or »
Λ
« and press
»OK«
to confirm.
Select the option »Cable« with »
<
«, »
>
«,
»
V
« or »
Λ
« and press
»OK«
to confirm.
4 Select the line »Automatic Channel Search«
with »
V
« or »
Λ
« and press
»OK«
to confirm.
The menu appears.
Scan Type
Exit
Back
SOURCE SETUP
AUTOMATIC CHANNEL
SEARCH
Country
Connection Type
Frequency (MHz)
Cable Scan Type
Network ID
U.K.
Cabel
Auto
Quick
Auto
08.08.2012
15:46
Start Search
DTV & ATV
5 Select the line »Scan Typ« with »
V
« or »
Λ
«
and set the option »DTV« with »
<
« or »
>
«.
6 Select the line »Cable Scan Type« with »
V
«
or »
Λ
« and set the option »Quick« or »Full«
with »
<
« or »
>
«.
The search function »Quick« sets the channels
according to the information provided by your
cable provide in the transmission signal.
If the option »Full« is selected, the entire fre-
quency range will be scanned. The search
can take a long time with this option. This
option is recommended if your cable pro-
vider does not support the search type
»Quick«
.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 28 VLE 5401 BG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 28 VLE 5401 BG in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 28 VLE 5401 BG

Grundig 28 VLE 5401 BG User Manual - German - 63 pages

Grundig 28 VLE 5401 BG User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info