544972
46
Zoom out
Zoom in
Previous page
1/58
Next page
ENGLISH
46
Searching for digital television
channels from a satellite manu-
ally
If you know the parameters of a new television
channel, you can also search for it manually.
Current transponder data can be found in the
teletext, in satellite TV magazines or on the
Internet.
1 Open the menu with »M«.
2 Select the line »SOURCE SETUP« with
»
C
«
or
»
D
« and press »OK« to confirm.
The »SOURCE SETUP« menu appears.
3 Select »Digital Manual Tuning « with
»
C
« or
»
D
« and press »OK« to confirm.
The menu appears.
4 Select the line required for the parameters
with
»
C
« or »
D
«.
»Frequency (MHz)«: Enter the five-digit
frequency with »1 ... 0« .
»Symbol Rate (kS/s)«: Enter the five-digit
symbol rate with »1 ... 0« .
»Polarization«: Use
»
B
« or »
A
« to set the
polarisation to »Horizontal« or »Vertical«.
»Network Search«: use
»
B
« or »
A
« to se-
lect the option »On« or »Off«.
»Scan Mode«: Use
»
B
« or »
A
« to select
whether you want to search for unencrypt-
ed (Unencrypted) channels only, encrypt-
ed (Encrypted) channels only, or for both
(Unencrypted + Encrypted).
»Service Type«: Use
»
B
« or »
A
« to select
whether you want to search for television
channels only (TV), radio stations only
(Radio), or both (Radio + TV).
5 Start the scan with »« (red).
The »Results« menu appears, and the scan
for TV channels begins.
Note:
7
You can abort the search by pressing »M«.
6 Press »
M« to end the setting.
SPECIAL SETTINGS
----------------------------------------------------------------------------------------------------------
LNB settings
Notes:
7
The following description about the LNB
settings premise a substantial expertise
about the satellite systems. Ask your
specialist dealer.
7
Your TV supports SCR system (Satellite
Channel Router). If you are using SCR
satellite system, follow the steps described
in »LNB Type« section.
1 Open the menu with »M«.
2 Select the line »SOURCE SETUP« with
»
C
«
or
»
D
« and press »OK« to confirm.
The »SOURCE SETUP« menu appears.
3 Select »Antenna Settings« with
»
C
« or »
D
«
and press »OK« to confirm.
The »ANTENNA SETTINGS« menu ap-
pears.
4 Select the line required for the parameters
with
»
C
« or »
D
«.
»Satellite«: »Press OK«, select a satellite
with
»
B
«, »
A
«, »
C
« or »
D
« and press
»OK« to confirm.
»Transponder«: »Press OK«, select a tran-
sponder with
»
B
«, »
A
«, »
C
« or »
D
«
and press »« to confirm. Use »« (red)
to add a transponder, use »« (green) to
delete it, or use »« (yellow) to change
transponder data.
»LNB Power«: Set the LNB power supply
(depending on the type of LNB) to »Of
»13/18 V« or »14/19 V« with
»
B
« or
»
A
«.
»LNB Type«: Select the LNB type used in
the satellite system with »
B
« or »
A
«. If
you are using a satellite antenna with an
Single Cable Distribution multiswitch, select
the setting »Grundig SCR«. After it, please
perform the »User Band«, »KB Frequency«
and »LNB Selection« settings in the
submenus. The necessary parameters you
will get from the operator of the satellite
antenna. Use only this specification!
»User Band«: Select the user band
number assigned to the user with »
B
«
or »
A
«.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 22 VLE 8220 WG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 22 VLE 8220 WG in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 22 VLE 8220 WG

Grundig 22 VLE 8220 WG User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info