544972
15
Zoom out
Zoom in
Previous page
1/58
Next page
15
ENGLISH
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
Tuning the television channels
from satellite (DVB-S)
You have two options for tuning digital satellite
channels.
A The easy installation,
which pre-configures all antenna settings for
the satellite channels on Astra 19.2° East.
B The advanced installation
can be used if you wish to receive satellite
channels from various satellites. To do so,
you must make the antenna settings (Satel-
lite, LNB Power, LNB Type, DISEqC Mode,
LNB Selection) for the satellites chosen.
Easy installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with
»
B
« or »
A
«.
2 Select the line »Easy Installation« with
»
C
«
or
»
D
« and press »OK« to confirm.
Other menu options will be displayed,
the satellite Astra 19.2° East is preset.
3 Start the scan with »« (green).
The »Search results« menu appears, and
the scan for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the scan by pressing »M«.
Advanced installation
1 In the »Source Setup« menu, in the »Connec-
tion Type« line, select the option »Satellite«
with
»
B
« or »
A
«.
2 Select the line »Advanced Installation« with
»
C
« or »
D
« and press »OK« to confirm.
The menu appears.
Satellite
ASTRA 2A,2B
Frequency (MHz)
10714
LNB Type
22 kHz
Universal
Auto
DISEqC Mode
Off
LNB Power
Off
LNB Selection
1/4
Auto Tuning
Manual Tuning
Quality
Signal strength
Low Normal Good
Exit
Back
INSTALLATION
ANTENNA SETTINGS
3 Select the line »Satellite« with »
C
« or »
D
«
and press »OK« to confirm.
The »SELECT SATELLITE« menu appears.
Select the satellites with
»
C
«, »
D
«, »
B
« or
»
A
« and press »OK« to confirm.
Note:
7
The setting in the line »Transponder« is not
required for this automatic scan.
4 Select the line »LNB Power« with
»
C
« or
»
D
«.
Depending on the type of LNB, set the LNB
power supply to »13/18 V« or »14/19 V«
with
»
B
« or »
A
«.
5 Select the line »LNB Type« with
»
C
« or »
D
«
and press »OK« to confirm.
Select the type of LNB installed with
»
B
« or
»
A
«.
Save the selection with »
« (green) or abort
the action with »
« (red).
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 22 VLE 8220 WG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 22 VLE 8220 WG in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 22 VLE 8220 WG

Grundig 22 VLE 8220 WG User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info