569941
16
Zoom out
Zoom in
Previous page
1/60
Next page
ENGLISH
16
6 Select the line »DISEqC Mode« with »
C
«
or
»
D
«.
Select »DiSEqC 1.0« or »DiSEqC 1.1« in
accordance with the existing antenna system
with
»
B
« or »
A
«.
DiSEqC 1.0 allows up to four satellites to
be received simultaneously.
DiSEqC 1.1 allows up to 16 satellites to be
received simultaneously.
7 Select the line »LNB Selection« with
»
C
« or
»
D
«.
Select the setting for the respective satellites
with
»
B
« or »
A
«.
8 Once the settings for the satellite have been
made, switch to the »AUTOMATIC CHAN-
NEL SEARCH« menu with
»« (red).
Select Satellite
Operator Selection
ASTRA 19.2°,E
Other
Service Type
All
Scan Mode
Free + Scramble
Network Search
Off
Connection Type
Satellite
Exit
Back
SOURCE SETUP
AUTOMATIC CHANNEL SEARCH
Start Search
08.08.2012
15:46
9 Select the line »Scan Mode« with »
C
«
or
»
D
«.
Select the scan mode with
»
B
« or »
A
«
(for unencrypted channels, for encrypted
channels only, or for both).
10 Select the line »Service Type« with
»
C
«
or
»
D
«.
Use
»
B
« or »
A
« to select whether you
want to search for television channels only
(TV), radio stations only (Radio) or both
(Radio + TV).
Note:
7
It is possible, that some TV channels (tran-
sponders) cannot be found. This is caused
by a change in satellite parameters made
by the broadcaster, e.g. new channels have
been added. Set the »Network Search« op-
tion to »On«.
11 Start the scan with
»« (red).
The »Results« menu appears, and the scan
for TV channels begins.
Depending on the number of television
channels received, this can easily take a
few minutes.
The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
7
You can abort the scan by pressing »M«.
12 Press »M« to end the setting.
Note:
7
If other television channels are to be tuned
from a second satellite, proceed as follows:
Open the menu with »M«, select the line
»SOURCE SETUP« with
»
C
« or »
D
« and
press
»OK«
to confirm. Then select the
»Automatic Channel Search« with
»
C
« or
»
D
« and press
»OK«
to confirm. Confirm
the line »Select Satellite« with
»OK«
and
select the preferred satellite with
»
C
«, »
D
«,
»
B
« or »
A
«. Start the scan with »« (red).
Continue the adjustment by step 7 of the
chapter.
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig 22 VLE 5421 SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig 22 VLE 5421 SG in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig 22 VLE 5421 SG

Grundig 22 VLE 5421 SG User Manual - German - 60 pages

Grundig 22 VLE 5421 SG User Manual - Dutch - 60 pages

Grundig 22 VLE 5421 SG User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info