789281
73
Zoom out
Zoom in
Previous page
1/91
Next page
73
GB
17) The robot lawnmower runs in circles along the
boundary cable
There is a live cable in the ground near the boundary
cable. Move the boundary cable.
If the robot lawnmower has registered the boundary
cable more than X times and has moved a few metres
away from the most recent registration point, it runs
around in a spiral trajectory to improve its coverage of
the lawn.
18) The robot lawnmower is very noisy
If the robot lawnmower makes more noise than normal,
check the following:
• Arethebladesdamaged?
Change all the blades and screws at the same time.
• Arethebladesblocked?
Remove any foreign objects (ropes, plastic, tape, etc.)
from the blades.
If there is noise from the motors that turn the cutting
disc or wheels, the robot lawnmower must be inspected
by a professional.
Cleaning and maintenance
Caution!
• AlwaysputthemainswitchintheOFFposition
before performing any form of cleaning or
maintenance on the robot lawnmower.
• Wearworkglovestoavoidcuttingyourselfonthe
blades.
• Makesurethatnowaterpenetratestherobot
lawnmower. The robot lawnmower must not be
rinsed or washed in running water.
The robot lawnmower should be cleaned regularly.
Wipe the exterior of the robot lawnmower with a damp
cloth.
Clean the robot lawnmowers charging socket and the
charging poles on the charging station with a small
brush or similar, and remove any dirt or deposits with a
small piece of very ne sand paper.
Adjust the cutting height to the lowest setting and turn
the robot lawnmower upside down.
Clean the cutting disc and the blades using a soft brush
or a damp cloth with a mild detergent, if necessary.
Check that the cutting disc can rotate freely.
Remove grass clippings, soil and mud from the wheels.
If any of the parts on the robot lawnmower are
damaged, worn or defective, they must be replaced
with the corresponding original parts.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grouw 17947 - L1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grouw 17947 - L1200 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 27.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info