789281
70
Zoom out
Zoom in
Previous page
1/91
Next page
70
Starting the robot lawnmower
Complete all necessary programming of the robot
lawnmower.
Press the START button (b) to start the robot
lawnmower.
If the current time is within the range from the start
time to the start time + the number of work hours for
the relevant day of the week, the robot lawnmower will
start to cut the grass.
If the time is outside this range, the robot lawnmower
will start to cut the grass. When the robot lawnmower
returns to the charging station to recharge the battery,
it remains in the charging station until the start time is
reached.
You can stop the robot lawnmower at any time by
pressing the red STOP button (3).
Press the HOME button (c) to get the robot lawnmower
to return to the charging station.
Running to the charging station
It is important that the robot lawnmower runs into the
charging station correctly when it needs charging, so
there is a specic running pattern.
When the robot lawnmower needs charging, it runs
until it registers the boundary cable. It will follow the
boundary cable all the way back to the charging station.
Error messages and troubleshooting
You can see on the display what is wrong if the robot
lawnmower has stopped.
Error message Indicates
Close cover to start 1) The control panel cover is
open
Mower trapped 2) The robot lawnmower is
stuck
Mower lifted 3) The robot lawnmower has
been lifted
Mower rolling over 4) The robot lawnmower has
rolled over
Motor over current 5) The robot lawnmower is
overloadedstes
Battery low voltage 6) Low battery voltage
Boundary signal
error
7) Boundary cable signal error
Battery temperature
abnormal
8) Abnormal battery
temperature
Battery error 9) Battery error
PCB over
temperature
10) PCB overheating
Charge error 11) Charging error
Hall error 12) Skirt error
The errors are described below.
1) The control panel cover is open
The robot lawnmower can only operate if the control
panel cover is fully closed. Put the cover down once you
have nished operating the lawnmower.
2) The robot lawnmower is stuck
The robot lawnmower reports an error if the obstacle
sensors are activated more than 5 times in one minute.
Press the OK button to re-start the robot lawnmower.
If the error occurs repeatedly, investigate whether the
boundary cable is laid out correctly, as the error often
occurs in places that are too narrow or too cramped for
the robot lawnmower to move forward after changing
direction.
Also check whether there are obstacles such as
branches, etc. that may be restricting the robot
lawnmowers freedom of movement.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grouw 17947 - L1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grouw 17947 - L1200 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 27.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info