789280
65
Zoom out
Zoom in
Previous page
1/91
Next page
65
GB
2. Move the cursor to the Set date and time menu
option using the UP/DOWN buttons (f) and press the
OK button (d) to open the menu.
3. Move the cursor to the relevant eld using the UP/
DOWN buttons (f) and enter the correct value using
the number buttons (g). Press the OK button (d) once
all the changes have been made.
4. The display shows the message Save it? (save
settings?). Press the OK button (d) to save the
changes, or press the BACK button (e) to go back.
Note!
If you enter a date or time outside the valid intervals
(e.g. 2018-08-32), the display will show the Invalid data
message for 3 seconds. You can then enter the correct
values again.
Menu option: Cutting grass in the rain
The robot lawnmower is equipped with a rain sensor so
that it can detect when it rains. The robot lawnmower
is programmed at the factory to return to the charging
station when it is raining suciently to activate the rain
sensor. There it will fully charge and then wait until the
rain sensor is dry before automatically starting to cut
the grass again. If this start time is outside of the robot
lawnmowers daily work time, it will not start again until
the following working day.
Note!
Do not short-circuit the rain sensor!
Note!
The robot lawnmower must return to the charging
station and the charging station must be disconnected
from the mains during a thunderstorm. Damage caused
by lightning strike is not covered by the guarantee.
You can change the robot lawnmowers settings as
follows:
1. Move the cursor to the General settings menu option
(h) using the UP/DOWN buttons (f) and press the OK
button (d) to open the menu.
2. Move the cursor to the Mow in the rain menu option
using the UP/DOWN buttons (f) and press the OK
button (d) to open the menu.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grouw 17941 - M900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grouw 17941 - M900 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 27.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info