788793

Grouw 17937 Manual

132
Zoom out
Zoom in
Previous page
1/165
Next page
53
GB
Installation
You can nd installation videos and tips at www.grouw.
dk.
The robot lawnmower’s operation
The robot lawnmower’s work area must be surrounded
by the boundary wire, which must form a continuous
loop around the area to be mowed.
The robot lawnmower runs in a random pattern within
the work area and changes direction whenever it
detects the boundary with its sensors, and each time it
encounters an immovable obstruction. This ensures that
the entire lawn is cut without leaving a pattern of wheel
tracks on it.
Once the robot lawnmower has registered the boundary
wire X times, it moves a few metres away from the most
recent registration point and runs around in a spiral
trajectory to improve its coverage of the lawn.
When the robot lawnmower needs charging, it
automatically follows the boundary wire back to the
charging station.
Planning
It is important that you carefully consider how the
boundary wire is laid out so that you encircle all the
obstacles such as beds, terraces, trampolines, shrubs
and trees, ponds and paths in your garden.
We recommend that you make a sketch of your garden
and mark the location of the charging station and the
boundary wire before you start laying it out.
If you follow the instructions above and take the time
required, it is not dicult to lay out the boundary wire.
Note! If your neighbour has a similar robot
lawnmower, there must be a clearance of at least
160 cm in all directions between your neighbour’s
boundary wire and your own! If your neighbour has a
robot lawnmower of a dierent make, you may need
an even greater distance, as the frequency in the
boundary wires are dierent.
Step 1: Installing the charging station
First nd out where in the garden the charging station
should be placed.
• Theinstallationpointmustbeclosetoanoutdoor
electrical socket that the charging station can be
connected to.
• Theinstallationpointmustbenexttothelawn.The
boundary wire that runs from the charging station
must be fed under the charging station so that its
end returns to the rear of the charging station. The
other end of the boundary wire must be fed to the
rear of the charging station.
• Theinstallationpointmustbeatanddryandthere
must be no obstructions 2 metres in front of the
charging station and 1 metre behind it. The charging
station should not be placed in a corner, as there
is a risk that the robot lawnmower will get stuck
between the corner and the charging station.
• Theinstallationpointmustbeintheshademost
of the day, as it is best not to charge the robot
lawnmower’s battery in direct sunlight where the
temperature may get too high. If necessary, purchase
a garage for the robot lawnmower so that it has
some cover when it is not cutting the grass.
• Theinstallationpointmustbefreeofantnestsand
the like to prevent insects getting into the charging
station.
… 132 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grouw 17937 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grouw 17937 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 17.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info