788793

Grouw 17937 Manual

57
Zoom out
Zoom in
Previous page
1/165
Next page
57
GB
Use
Starting and stopping the robot lawn-
mower
1. Set the main switch (9) to the ON position.
2. Press and hold the POWER button (a). The on/locked
indicator light (j) lights up red and the indicator
lights for battery (g) and error (h) ash alternately.
The robot lawnmower is ready after about 4 seconds.
3. Enter the four-digit PIN code using the buttons 1-4
(b, c, d, e) and then press the OK button (f) to unlock
the control panel.
If you have entered the correct PIN code, the
indicator light for on/locked will be green.
If you have entered an incorrect PIN code, the
indicator light for on/locked will be red. Press the OK
button and enter the correct PIN code.
Note! The PIN code is set to 1-2-3-4 at the factory.
You can set your own PIN code – see “Changing the
PIN code”.
If you want to lock the control panel, press the
LOCK/4 button (e).
4. Press the START/2 button (c) and then press the OK
button (f).
If the battery capacity is in excess of 30%, the battery
indicator light (g) will light up green and the robot
lawnmower will start to mow the lawn.
If the battery capacity is 30% or less, the battery
indicator light (g) lights up red and the robot
lawnmower automatically returns to the charging
station along the boundary wire.
5. If you press the HOME/3 button (d) and then the
OK button (f), the robot lawnmower returns to
the charging station, regardless of the battery’s
remaining capacity. If it is within the cutting time, it
will recharge and run out again.
If you press the red STOP button (1), the robot
lawnmower stops immediately.
Running to the charging station
It is important that the robot lawnmower runs into the
charging station correctly when it needs charging, so
there is a specic running pattern.
When the robot lawnmower needs charging, it runs
until it registers the boundary wire. It will follow the
boundary wire all the way back to the charging station.
Setting the daily work time
1. Switch the robot lawnmower on as described above
so that the on/locked indicator light (j) lights up
green.
2. Press the SET WORK TIME/1 button (b) one or more
times to set the daily work time to 4, 6, 8, 10 or 12
hours. Press the OK button (f) to conrm the setting.
3. Press the START/2 button (c) to start the robot
lawnmower. The robot lawnmower starts cutting the
lawn and continues working for the set number of
hours. It starts cutting again each day at the same
time as the rst time. We recommend that the robot
lawnmower is set to start at 9 in the morning, when
there is not too much dew on the lawn.
Recommended daily work time:
300 m2 lawn: 4 hours
500 m2 lawn: 6 hours
You can subsequently change the robot lawnmower’s
start time so that it starts at a dierent time than you
originally set.
Wait until the time that you want the robot lawnmower
to start every day.
Enter the PIN code. Press the SET WORK TIME/1 button
(b) and set the daily work time to 4, 6, 8, 10 or 12 hours.
Press the OK button (f) to conrm the setting.
Press the START/2 button (c) to start the robot
lawnmower.
The robot lawnmower then starts at this time every day
and works for the selected number of hours.
Multi-zone function
Pair the robot lawnmower with your smartphone or
tablet via Bluetooth and open the app to set the multi-
zone function.
In eld Area2_Per you must set how much of zone 2
constitutes in relation to the total area of the lawn.
In the Area2_Dis eld you must specify how many
metres the robot lawnmower must follow the boundary
wire before it reaches zone 2. It is recommended that
you measure the boundary wire halfway into zone 2 to
be absolutely sure that the robot lawnmower starts in
the correct zone.
The elds Area3_Per and Area3_Dis apply in the same
way for zone 3.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grouw 17937 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grouw 17937 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 17.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info