Manual Grouw 17936 (page 138 of 165) (English, German, Danish, Swedish, Norwegian, Finnish)

788792

138

Zoom out

Zoom in

1/165

Note! In the event of a boundary wire signal error

If the error indicator light ashes red on, there is an error

in the boundary wire signal:

• Theboundarywireistoolong(over250m).

• Theboundarywireisassembledincorrectly,there

is moisture in a joint, or an incorrect connector has

been used.

• TheboundarywiremustNOTbestrippedwhenrst

using the connector provided.

• Youcanremovetheendsoftheboundarywirefrom

the charging station and measure the resistance

of the boundary wire using a multimeter. A new

boundary wire has a resistance of about 2 Ohm per

100 metres.

If the boundary wire’s resistance measures more

than 8-10 Ohm, the robot lawnmower will display a

boundary wire signal error.

• Youcancreateatestcircuitusingapprox.10metres

of boundary wire to check that the robot lawnmower

is working properly. Remember to remove the ends

of the real boundary wire from the charging station

rst.

Correct the error or replace the boundary wire.

If the indicator light ashes green and there is a break in

the boundary wire, you must join the two broken ends

of the boundary wire using a connector. Cut the ends of

the boundary wire cleanly using side-cutting pliers and

insert the ends into the connector WITHOUT stripping

them rst. Press the connector fully together using

at-nose pliers so that the internal metal plate goes

through the boundary wire’s insulation and recreates

the connection.

Once the indicator light turns green, the boundary wire

has probably been installed and connected properly,

unless the robot lawnmower displays a boundary wire

signal error. Check that all the plastic pegs are knocked

fully into the ground and that the boundary wire is taut

and at against the ground right the way round.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grouw 17936 in the language / languages: English, German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 17.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grouw 17936 Manual

Product: