505569

Ground zero GZIA 1.300HPX Manual

80
Zoom out
Zoom in
Previous page
1/140
Next page
10
Controles y funciones
1
Terminales altavoz
Para conectar a los altavoces
2
Terminales de corriente
GND -> Conectara a masa ( chapa del coche)
REM -> Remote de antenna de radiol [No usar con entrada de alta (5)]
BATT -> +12 Volt
3
Indicador de status
VERDE – OK
ROJO – Error
4
RCA inputs
Terminalpar conectar los cables de RCA .
Para evitar fallos, ppor favor use cables RCA de calidad.
IMPORTANTE!
No usar cables de RCA si se tienen entradas de alta conectadas, puede dañar su
sistema. Usar una u otra entrada
5
High Level inputs
Son para usarlas con Fuentes originals que no dispongan de de salidas de RCA.
Connectar esta entrada a las salidas de altavoces de la radio. El amplificador
automáticamente se encenderá tan pronto como la señal se reciva (Auto On). El cable de
remote no se tendrá que usar en este caso- Terminal (2).
IMPORTANT!
No usar cables de RCA si se tienen entradas de alta conectadas, puede dañar su
sistema. Usar una u otra entrada
6
High Pass controller
Ajuste el interruptor a la posicion „HIGH“ .
Ajuste la frecuencia variable del crossover HPF a la frecuencia deseada usando el
potenciometro. Todas las frecuencias a partir de 40 y3000 Hz pueden ser reproducidas.
7
Low Pass controller
Solo las frecuencias desde 30Hz a 250Hz seran reproducidas (dependiendo de la posición
del filtro LPF ). Coloque el interruptor ala posición „LOW“ . Ajuste la frecuencia variable
donde desee usando el potenciometro.
8
Mode switch
Ajuste el crossover para escojer la utilzacion.
LPF – Solo frecuencias bajas (entre 30Hz - 250Hz) seran reproducidas.
FLAT – Todas las frecuencias seran reproducidas.
HPF – Solo medio-altas frecuencias (sobre 40Hz – 3000Hz) serasn reproducidas.
9
Remote control input
Para conectar el potenciometro remote de sub (GZIA 2130HPX/ 2235HPX/ 1.600HPX)
10
Input level controller
Con este potencimetro puede regular la sensiblñidad de entrada.
11
Bass Boost controller
Para poder ajustar los graves en 45hz desde 0- 12db
High Level Input- Entrada de alta (altavoces)
Dependiendo de la configuracion de tu coche y sistema de sonido ruidos o parasites pueden
aparecer al usar la entrada de altas. Por favor usar el cable adicional del medio a masa para
reducir posibles parasitos.
El function de auto encendido permite usar el amplificador sin necesidad de usar un remote
exterior. Esto hace posible operer con un sistema de radio original(OEM )y que la radio original
active el sistema, siempre que estas radios no dispongan de RCA y remote.
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ground zero GZIA 1.300HPX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ground zero GZIA 1.300HPX in the language / languages: German as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info