505523
37
Zoom out
Zoom in
Previous page
1/42
Next page
28
GROUND ZERO
Audio Setup Page
Analog audio setup
Here you can set the format in which the DVD sound should be played back.
STEREO = analog stereo signal
RIGHT / LEFT = Dolby Pro Logic stereo signal (2 channel sound)
SURROUND = Virtual surround sound
If STEREO has been switched on, “STR“ will appear, for RIGHT / LEFT, “LTRT“ will appear, and for
SURROUND, “VSR“.
Equalizer
Through this function you can adjust the tone color of the output sound according to your own
preferences. Through the EQ type, you can select the preset sound settings. The menu item bass
increase just allows you to increase the bass frequencies. With super bass, you have an additional option
of increasing the bass output. The setting treble increase also allows you to increase the treble levels
correspondingly.
3D Processing
Through this function you can adjust the sound effects of the output sound according to your own
preferences. The echo mode setting enables you to select one of the preset reverberating effects.
HDCD
The HDCD function enables you to carry out certain settings if you are using such a data carrier.
Because of the low market distribution of this type of data carrier, this function is turned off by default.
29
GROUND ZERO
Video Setup Page
Color settings
This function enables you to adjust the color settings of the DVD playback according to your preferences
(possible levels are listed in brackets)
Sharpness
This serves to set the sharpness of the image (high / medium / low).
Brightness
This serves to set the brightness of the image (- 20 to + 20).
Contrast
This serves to set the contrast of the image (- 16 to + 16).
While adjusting the brightness or contrast, press right key to enter into the setup file; then, use up/down
keys to set up and left key to return back to the setup manual.
GAMMA
This serves to set the gradation. The gradation is the exponent between the displayed brightness and the
image or pixel values (high / medium / low /none).
Hue
This serves to set the hue (- 9 to + 9).
Saturation
This serves to set the color saturation (- 9 to + 9).
Luma Delay
This serves to set the luminance delay. A change in this setting is only required if the color and
brightness aren’t coextensive (“0 T” and “1 T”).
User can perform “0T” or “1T” setup according to varied TV brightness and color.
In normal situation it should select “1T” for DVD format and “0T” for other formats.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ground zero GZCR 755MON at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ground zero GZCR 755MON in the language / languages: German as an attachment in your email.

The manual is 6,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info