Manual Ground zero GZCR 755MON (page 34 of 42) (German)

505523

Zoom out

Zoom in

1/42

GROUND ZERO

Calling up stored stations

- Select a band (if needed)

- Press a station button (M1-M6) on the on-screen keyboard or digit (1-6) button on remote control to

recall the stored station.

Scan stored stations

For this function, the stations stored under the station buttons of a particular wave length are scanned

for about 5 seconds. In order to begin scanning, briefly press the “PSCN” button on the screen or on the

Remote Control. The station positions “1” - “6” will begin flashing on the display in sequence and the

corresponding stations will be scanned. When the monitor is open, the currently scanned memory

position has a lighted background and PRESET will be indicated on the display. To remain at the currently

scanned station, press the “P.SCAN” button or the PSCN field again. Then the setting will remain at the

last scanned station. If no entry is made by the end of the complete search, the device will play the first

station on the corresponding level (e.g. F1 or FM 1).

LOC function

The “LOCAL” function is relevant for the station search. Here you can select whether only local, strong

stations (“ON”) or also weaker, more distant stations (“OFF”) are searched for. You can activate the

function by briefly pressing the screen button “LOC” once. Then the button switches colors from grey to

white. This function can be turned off again by pressing the screen button "LOC" once more. Then the

color changes from white to grey again.

STMO function

The “STMO” function enables you to switch back and forth between mono and stereo playback in FM

mode. This is especially useful when the stereo signal of the selected radio station doesn’t carry an ideal

strength. In order to activate the “STMO” function, please press the screen button “STMO” once briefly.

Then the color changes from white to grey again and the radio signal is briefly interrupted. In order to

deactivate the “STMO” function again, please press the screen button “STMO” briefly once more. Then

the color of the button changes from white to grey again and the radio signal is briefly interrupted.

RDS

RDS is an information system whose signals are additionally broadcast by most FM stations. With RDS

programs, the name of the program appears as an abbreviation on the display. Further information, such

as frequency, time and program type (PTY) can be faded in. An RDS program will be broadcast by

several senders on different frequencies (alternative frequencies). If an RDS program has been selected,

the device automatically switches to the alternative frequency that can be received most clearly, as long

as that is available and the AF function has been turned on. You can read the RDS information when the

monitor is open. The time, RDS station name and frequency will appear on the display.

Traffic announcements (“TA”), traffic program (“TP“)

Long press the “AF/TP” button on the device or short press TP button on remote control to activate/

deactivate the traffic announcement program. When the monitor is closed, the message “TA” will be

displayed when this function is activated, when the monitor is open, the display will jump to the RDS

submenu and you can also switch this function on or off by pressing on-screen TP button.

GROUND ZERO

Alternative frequencies (“AF“)

Briefly press the “AF/TP” button or AF button on remote control to activate/deactivate the “AF” function.

When the monitor is open, the display will jump to the RDS submenu and you can also switch this

function on or off by pressing on-screen AF button.

The RDS program will be automatically searched and received. After turning on, if the RDS signal is weak

or even no signal, the unit will search another frequency with this RDS program.

Radio reception conditions

In the FM wave band, there can be changes in the reception conditions during the drive. Mountains,

buildings or bridges can diminish reception. This applies especially if the distance to the station is large.

Enhanced Other Networks (EON)

The “EON” function is an additional RDS service. If the current program doesn’t offer any traffic

announcements, EON automatically switches to the traffic announcements on another program. After the

end of the announcement, the device switches back to the previously heard station. The readiness for

traffic announcements “TA” has to be activated for this. To turn the EON function on or off, please

switch to the RDS menu.

Regional programs (“REG“)

Some radio stations divide their programs into regional programs with different content at specific times.

If the reception is getting worse, the “REG” function prevents the car radio from changing to alternative

frequencies that have different program contents. To turn the “REG” function on or off, enter the RDS

menu and select REG ON or OFF or long press AF button on remote control.

PTY (Program Type)

Many radio stations give codes to individual programs according to their type (e.g. Culture, Music). The

unit allow you to select the type of program required, and will search for a station broadcasting that type

of program.

1. Press PTY button to turn on the PTY function.

2. Press and hold this button for at least 2 seconds to display the current selected PTY type.

3. Turn the volume dial on the device or press VOL+/- button on remote control to select between

different PTY types.

4. Press PTY button to start searching for the program of the selected PTY type.

5. Press PTY button again to switch off PTY function.

RDS Time and Date (CT-Clock Time)

Part of the RDS data is used to transmit the current time and date. The clock will automatically set itself

for summer and winter time changes. It will also take account of leap years and, if traveling in a foreign

country, will adjust between different time zones.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ground zero GZCR 755MON in the language / languages: German as an attachment in your email.

The manual is 6,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ground zero GZCR 755MON Manual

Product: