568409
6
Zoom out
Zoom in
Previous page
1/20
Next page
Namensschild
beschriften
!
!
!
!
Schrauben lösen
Oberteil abnehmen
Namenschild durch den
Schlitz herausziehen
Beschriftetes
Namensschild einschie-
ben und Oberteil ver-
schrauben
Add lettering to name
plate
!
!
!
!
Release screws
Remove upper part
Draw out name plate
through slot
Push in name plate with
lettering and screw upper
part in place.
Marquage sur le porte-
étiquette
!
!
!
!
Dévisser les vis
Oter la partie
supérieure.
Extraire la l'étiquette à
travers la fente prévue
dans le joint.
Après le marquage
l'étiquette, insérer cette
dernière et revisser la
partie supérieure.
Naamplaatje van tekst
voorzien
!
!
!
!
Schroeven losdraaien.
Bovengedeelte verwij-
deren.
Naamplaatje door eruit
trekken.
Naamplaatje met
opschriften erin schuiven
en bovengedeelte vast
schroeven.
OCV
Clip-Befestigung (zum
Aufhängen des Senders)
!
!
!
!
Legen Sie fest, auf
welcher Seite Sie den
Clip befestigen möchten
Schieben Sie auf dieser
Seite gemäß Bild 1 die
vorhandene Schraub-
Mutter mit einem kleinen
Schraubendreher heraus
Kürzen Sie gemäß Bild
2 die seitliche Lasche am
Gehäuse-Oberteil um ca.
2,5 mm
Stecken Sie nun gemäß
Bild 3 den mitgelieferten
Metall-Clip ein. In der
Öse des Clips können
Sie nun eine Kette etc.
befestigen
Clip attachment (to hang
the transmitter)
!
!
!
!
Determine on which
side you want to attach
the clip
Use a small screw
driver to push the
existing screw nut out on
this side as shown in
figure 1.
Shorten the lateral latch
of the front casing by
about 2,5mm (figure 2)
Insert the included
metal clip in its place
(figure 3). You can now
attach a chain, etc. to the
eye of the clip.
Fixation du clip (pour
suspendre l’émetteur)
!
!
!
!
Décidez du côté sur
lequel vous souhaitez
fixer le clip.
Avec un petit tournevis,
retirez de ce côté l'écrou
qui s’y trouve (voir Fig.
1).
Raccourcissez le verrou
latéral de 2,5mm (voir
Fig. 2).
À la place, enfichez le
clip métallique fourni
avec l’appareil (voir Fig.
3). Vous pouvez
désormais fixer une
chaînette ou autre dans
l’œillet du clip.
Clipbevestiging (om
zender aan op te
hangen)
!
!
!
!
Kies aan welke kant u
de clip vastmaken wilt
Schuif aan deze kant
volgens afb. 1 de
voorhandene
schroefmoer met een
kleine schroevendraaier
eruit
Verkort de zijklink van
de huisvesting door
2,5mm (afb. 2)
Zet in plaats daarvan
de meegeleverde
metalen clip erin (afb. 3).
Aan het oogje van de clip
kunt u nu een ketting e.d.
Vastmaken
6
GB
F
D NL
Spannungsversorgung
!
!
Alternative A (Bild 6):
Batterien 2x1,5 V (Typ
LR03/AAA, Alkaline)
Alternative B (Bild 7): 6-
12V= (DC) über
Klemmen 0=”-” und
V=”+”. ACHTUNG! In
diesem Fall Batterie aus
Sender nehmen!
Voltage Supply
!
!
Option A (Figure 6) :
Battery 2x1,5 V (type
LR03/AAA, Alkaline)
Option B (Figure 7): 6-
12V=
(DC) via terminals
0 = “-” and V = “+”.
WARNING! In this case
remove battery from
transmitter!
Alimentation électrique
!
!
Variante A (figure 6):
pile 2x1,5 V (modèle
LR03/AAA, alcaline)
Variante B (figure 7): 6-
12 V = (CC) via des
bornes
0="-"etV="+".
IMPORTANT : il faut
dans ce cas enlever la
pile présente dans
l'émetteur.
Elektrische voeding
!
!
Alternatief A (Afbeelding
6): batterij
2x1,5 V (type LR03/AAA,
alkaline).
Alternatief B
(Afbeelding 7): 6-12 V =
DC via klemmen 0=„-” en
V=„+”. ATTENTIE! In dit
geval batterij uit de
zender verwijderen.
INSTALLATION
Batterien/Ver-
drahtung: Sender
INSTALLATIE
Batterijen/Bedra-
ding: Zender
INSTALLATION
Piles/Câblage:
Emetteur
INSTALLATION
Batteries/Wiring:
Transmitter
Alt. B (6-12V DC)
-
Oder/or
Alt. A
TC
V
O
+
Alt. A
7
6
54,8 mm
20,8
mm
Dr. Meyer
4,8 mm
5
3
4
1
2
2,5 mm
6


Need help? Post your question in this forum.

Forumrules
1

Forum

grothe-mistral-400m

Reset search

  • I have two 400M sets, one for each door. Is it possible for both to be linked so that either transmitter will activate all receivers? Submitted on 6-5-2022 at 23:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grothe Mistral 400M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grothe Mistral 400M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info