759534
89
Zoom out
Zoom in
Previous page
1/92
Next page
86
External interface
Via the external interface the Bluetooth® adapter can be
rebooted or resetted. It is adapted as a break contact, which
can be used with conventional nc (normally closed) type
switches or push buttons.
1. Turn the entire system free of voltage.
2. Remove Bypass (C), see fold-out page I.
3. Connect switch or push button with cable 47 868 000
(special accessorie) to the external interface
(max. 16.4 ft [5m]).
4. Supply the entire system with voltage.
If the external interface is not used, the bridging contact
must remain plugged in!
Pairing
Pairing means the first coupling between two Bluetooth®
devices. This requires a proper executed installation. For an
already active Bluetooth® connection between a terminal
device and the Bluetooth® adapter no pairing is possible.
1. Activate Bluetooth® on device.
2. Select xxx Grohe SPA from Bluetooth® list.
xxxx is the 4-digit number (PIN number) which will be
displayed.
3. Enter PIN number and confirm.
4. Connection will established automatically.
5. The LED (A) on the adapter flashes 1x blue for a short time
when connection is quite correct.
The PIN number is unique for each adapter and is additionally
documented with a sticker on the backside. These are the last
four digits of the serial number. The PIN number can not be
changed!
When successfully paired, the PIN is no longer required when
a new connection attempt. When connected and activated the
App LED on the adapter lights up blue continuously. A
maximum of 8 devices can be paired. When logging a 9th
device the most rarely used one will be deleted from the list.
XXXX
Operation of the reset button (A) and Visualization by status LED (B)
Functions
Function Visualization
Operation takes place LED lights permanently blue
Reboot of the adapter LED lights up red for 3 sec.
Reset of the adapter LED lights up red, off, red, blue, red
Ready for operation LED off
Modul is supplied with voltage LED lights up red for 1 sec.
Permanent press of button, or
bridging contact removed
LED flashes red
Function Describtion
Changing the device Device will be logged out (connection closed/inactive).
After 10sec. the new device can be logged in.
Prioritization of connections It will be ensured that the operation can take place only with a single device
at any time.
Visibility of the Bluetooth® adapter The Bluetooth® adapter is always visible.
Reboot the Bluetooth® adapter
(Entire system turns off)
Press the button shortly (less than 3 sec.):
- Connection will be interrupted
- Bluetooth® adapter reboots
- System shuts down (Music, light (max. 60sec. delay), steam)
Reset of the Bluetooth® adapter
(Entire system turns off)
Press and hold the button (between 10 and 20sec.):
- Connection will be interrupted
- Pairing list will be cleared
- Bluetooth® adapter reboots
- System shuts down (Music, light (max. 60sec. delay), steam)
Data transfer As soon as a device is connected, the system can be operated using the
Grohe App.
Audio stream As soon as a device is connected, an audio stream can be sent to the
system by the Grohe App.
A
B
C
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grohe 36371 F-DIGITAL DELUXE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grohe 36371 F-DIGITAL DELUXE in the language / languages: All languages as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info