759343
26
Zoom out
Zoom in
Previous page
1/100
Next page
25
D
Technische Daten Grohtherm SmartControl
Thermostat
Fließdruck
- Mindestfließdruck ohne
nachgeschaltete Widerstände 0,5 bar
- Mindestfließdruck mit
nachgeschalteten Widerständen 1 bar
- Empfohlen 1,5 - 5 bar
Mindestdurchfluss 5 l/min
Temperatur
- Warmwassereingang max. 70 °C
- Zur Energieeinsparung empfohlen 60 °C
- Thermische Desinfektion möglich
Warmwassertemperatur am
Versorgungsanschluss min. 2 °C höher als
Mischwassertemperatur
Durchflüsse ohne nachgeschaltete Widerstände,
siehe Seite 36-51. Diese sind bei der
Dimensionierung des Abflusses zu beachten!
Einbaumöglichkeiten, siehe ab Seite 35.
empfohlende Konfigurationsmöglichkeiten, siehe
ab Seite 36-51.
Folgende Sonderzubehöre sind erhältlich:
Verlängerung 25mm (Best.-Nr.: 14 048)
Sicherheitseinrichtung, nur in Verbindung mit
zwei Ventilen (Best.-Nr.: 14 055)
Vorabsperrungen (Best.-Nr.: 14 053)
Seitenverkehrter Anschluss, warm rechts - kalt
links Thermostat-kartusche austauschen (Best.-
Nr.: 49 003)
GB
Technical specifications Grohtherm
SmartControl Thermostat
Flow pressure
- Minimum flow pressure without
downstream resistances 0.5 bar
- Minimum flow pressure with
downstream resistances 1 bar
- Recommended 1.5 – 5 bar
Minimum flow rate 5 l/min
Temperature
- Hot water inlet max. 70 °C
- Recommended for energy saving 60 °C
- Thermal disinfection possible
Hot water temperature at supply connection
min. 2 °C higher than mixed water temperature
Flow rates without downstream resistances, see
page 36-51. These are to be observed when
dimensioning the outlet!
Installation options, see page 35.
Recommended configuration options, see from
page 36-51.
The following special accessories are available:
Extension 25mm (prod. no.: 14 048)
Safety device, only in combination with two
valves (prod. no.: 14 055)
Isolating valves (prod. no.: 14 053)
Reversed connection, hot on right – cold on left
replace thermostat cartridges (prod. no.: 49 003)
F
Caractéristiques techniques Grohtherm
SmartControl Thermostat
Pression dynamique
- Pression dynamique minimale
sans résistances en aval 0,5 bar
- Pression dynamique minimale
avec résistances en aval 1 bar
- Recommandée 1,5 à 5 bars
Débit minimal 5 l/min
Température
- Arrivée d’eau chaude max. 70 °C
- Recommandée pour une
économie d’énergie 60 °C
- Désinfection thermique possible
Température de l’eau chaude au raccord
d’alimentation au moins 2 °C de plus que la
température de l’eau mitigée
Débits sans résistances en aval, voir pages 36-51.
Veuillez en tenir compte lors du
dimensionnement de l’évacuation !
Possibilités de montage, voir page 35.
Possibilités de configuration recommandées, voir
à partir de la page 36-51.
Les accessoires spéciaux suivants sont
disponibles :
Rallonge de 25mm (réf. : 14 048)
Dispositif de sécurité, uniquement avec deux
vannes (réf. : 14 055)
Robinets d’arrêt (réf. : 14 053)
Raccordement inversé, chaud à droite - froid à
gauche,remplacer la cartouche du thermostat
(réf. : 49 003)
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grohe 35604 Rapido SmartBox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grohe 35604 Rapido SmartBox in the language / languages: All languages as an attachment in your email.

The manual is 8,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info