Manual Grohe 22513 Sense Guard (page 9 of 84) (All languages)

759389

Zoom out

Zoom in

1/84

• In addition to the operating instructions,

the recognized rules of engineering and

technical rules for safe and professional

work must be adhered to.

Instructions on installation:

• Installation may only be performed in

frost-free rooms.

• Installation must be carried out by a

trained professional installer.

• Prior to installation, the water supply must

be disconnected.

• By manually triggering the cold water

cut-off using GROHE Sense Guard (see

page 4) it must be checked after

installation whether or not hot water is still

leaking from outlets in the house.

Leakage can be prevented by using

GROHE thermostat fittings.

• The installation and the use of GROHE

Sense Guard are subject to applicable

national provisions.

Instructions on power supply:

• The valve stays open in the event of

power failure.

• The plug-in power supply is only suitable

for indoor use.

• The plug-in connectors must not be

directly or indirectly sprayed with water

when cleaning.

• The voltage supply must be able to be

switched on/off separately.

Instructions on operation:

• The water to be used must comply with

the European Drinking Water Directive.

Before using with water of a different

quality or containing additives, the

manufacturer must be consulted.

• GROHE Sense Guard may only be used

as outlined in the operating instructions.

Any other usage or usage extending

beyond that described is deemed

improper use.

• GROHE Sense Guard must only be used

in good order and condition, as intended,

and with safety and hazard awareness by

adhering to the operating instructions.

• Malfunctions must be immediately

remedied.

• No liability is assumed for damage owing

to non-compliance with the operating

instructions.

• Use only original spare parts and

accessories. The use of other parts will

void the warranty and the CE marking,

and could cause injury.

Software and internet connection:

•

In order to ensure operation as a fully-

functioning device, both the smartphone

used and the GROHE Sense Guard must

be connected to the internet and the

device must be successfully installed with

the GROHE ONDUS app beforehand.

Otherwise, the device is not configured

and no warning messages can be

given.

GROHE takes all necessary

measures to ensure safe and correct use.

In the event of a malicious attack by third

parties, GROHE advises to install the

latest firmware and/or disconnect the

device from the power supply grid until

you receive further information from

GROHE.

Intended use

GROHE Sense Guard is suitable for use in cold potable water

up to a maximum water temperature of 40 °C.

GROHE Sense Guard is only permitted to be installed in

potable water installations for detached houses and flats that

have separate water supply lines (observe EN 806).

The GROHE Sense Guard meets the requirements of

DVGW VP 638.

GROHE ONDUS app and connection to the internet

GROHE Sense Guard connected to the internet via WLAN can

be integrated and configured in the GROHE ONDUS app. This

app can be used to provide warnings and alarms in the form of

push notifications.

A WLAN router with internet access

(2.4 GHz, IEEE 802.11b/g/n) is required.

Only WLAN channels 1 – 11 can be used.

Installation of the app:

If the app or the device firmware requires updating, the

smartphone must be located in the immediate vicinity of the

GROHE Sense Guard. In this way, possible interruptions in

function can be controlled and rectified.

Apple: Android:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grohe 22513 Sense Guard in the language / languages: All languages as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grohe 22513 Sense Guard Manual

Product: