Manual Grizzly ERM 2046 G (page 70 of 108) (English, German, Dutch, French, Italian, Polish, Portuguese)

505440

Zoom out

Zoom in

1/108

these instructions. Ensure sufcient

distance between feet and the rotating

blades.

• Do not tilt the equipment when start-

ing other than if it is necessary to do

so when starting up in long grass. In

this case, tilt the equipment by press-

ing down the handle bar such that

the front wheels of the equipment are

raised. Always check that both hands

are in the working position before re-

turning the equipment to the ground.

• Never work without an collision guard

or the grass catcher. Always stay away

from the discharge opening.

Caution! Danger! The blade contin-

ues to run after switching off.

There is a risk of injury.

• The equipment is not to be lifted or

transported while the motor is running.

Switch off the equipment if it has to be

tilted in transit, when crossing surfaces

other than grass, and when the equip-

ment is being transported to and from

the surfaces to be mowed.

• Always keep the grass ejection hole

clean and clear. Remove cut material

only when the equipment is stopped.

• Do not leave the equipment unat-

tended in the workplace.

• Do not work with equipment that is dam-

aged, incomplete, or has been modied

without the authorisation of the manu-

facturer. Do not use the equipment with

damaged safety devices or screens or

with missing safety equipment such as

deection and/or grass collection de-

vices.

• Do not overload the equipment. Work

only within the specied power range

and do not change the regulator set-

tings on the motor. Do not use low-

powered machines for heavy work. Do

not use your equipment for purposes

other than those for which it is de-

signed.

• Do not use the equipment near

inammable liquids or gases. Non-

observance will result in a risk of re

or explosion.

• Do not lift or carry the equipment

when the motor is running.

• Switch off the equipment and discon-

nect the plug:

- Whenever you leave the machine,

- Before cleaning the ejection hole

or removing blockages,

- When the equipment is out of use,

- Before checking, cleaning or work-

ing on the equipment,

- If the power cable is damaged or

frayed,

- If the equipment has hit a foreign

object or if strange vibrations occur

during work. In this case, check the

equipment for damage and have it

repaired if applicable.

• Do not place feet or hands near or

under rotating parts. Do not stand in

front of the grass ejection hole during

sickle mowing.

Maintenance and Storage:

• Ensure that all nuts, bolts and screws

are tightened rmly and the equip-

ment is in safe working condition.

• Do not attempt to repair the equip-

ment yourself unless you have been

trained to do so. Any work not speci-

ed in these instructions is to be car-

ried out only by customer service

centres that we have authorised.

• Keep the equipment in a dry location

and out of reach of children.

• Handle the equipment with care. Keep

tools sharp and clean, in order to fa-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly ERM 2046 G in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 5,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly ERM 2046 G Manual

Product: