Manual Grizzly ERM 1637 G (page 22 of 144) (English, German, Dutch, French, Italian, Polish, Portuguese)

505435

Zoom out

Zoom in

1/144

Maintenance and Storage:

When servicing the blades, re-

member that they can move even

if the power source is off.

• Ensure that all nuts, bolts and screws

are tightened rmly and the equip-

ment is in safe working condition.

• Check the mower for any damages.

• Repair damaged parts as appropriate.

• Do not attempt to repair the equip-

ment yourself unless you have been

trained to do so. Any work not speci-

ed in these instructions is to be car-

ried out only by customer service

centres that we have authorised.

• Keep the equipment in a dry location

and out of reach of children.

• Handle the equipment with care. Keep

tools sharp and clean, in order to fa-

cilitate better and safer work. Follow

the maintenance instructions.

• Wear protective gloves when chang-

ing the cutting device.

• Regularly check the grass collection

device for wear and strains. For safety

reasons, replace worn or damaged

parts. When adjusting the blades, take

particular care to avoid ngers being

trapped between the rotating blades

and xed parts of the machine.

• Check that only replacement tools

authorised by the manufacturer are

used.

Electrical Safety:

• Ensure that the mains voltage matches

the specications on the rating plate.

• If possible, connect the equipment only

to a socked with a residual current-

operated protective device (RCD) with

a release current of more than 30 mA.

• Avoid bodily contact with earthed

parts (e.g. metal fences, metal posts).

• Use only authorised power cables of

type H05VV-F or H05RN-F, which are

no more than 75 m long and suitable

for outdoor use. The power cable

wire cross section must be at least

2.5 mm

. Always completely unroll

cable drums before use. Check the

cable for damage.

• To x on the power cable, use the

cable suspension intended for the pur-

pose.

• Keep the power cable away from the

cutting tool when working. The cutting

blades may damage the power cable

and result in contact with live parts. Al-

ways run the power cable behind the

operator.

• Do not use the power cable to pull

the plug from the socket. Protect the

power cable from heat, oil and sharp

edges.

• Switch off the equipment and discon-

nect the plug from the socket if the

power cable is damaged. If the power

cable is damaged, it must be replaced

by the manufacturer, the customer

services of the same, or a qualied

person, in order to avoid hazards.

• Do not connect a damaged power

cable to the mains. Do not touch

a damaged power cable when it is

connected to the mains. A damaged

power cable may result in contact with

live parts.

General Description

Function Description

The electric lawnmower has a cutting tool,

which turns parallel to the cutting level.

It features a powerful electrical drive, a

sturdy plastic casing, a safety switch, a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly ERM 1637 G in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 6,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly ERM 1637 G Manual

Product: