Manual Grizzly ERM 1030 G (page 44 of 120) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

505424

Zoom out

Zoom in

1/120

The rst cut is to be made in around April,

at a growth height of 70 � 80 mm. In the

main vegetation period, the lawn is to be

mowed at least once a week.

• Start mowing near the socket and

work away from the socket.

• Always keep the extension cable be-

hind you and when you turn, move it to

the side that has already been mowed.

• Run the equipment at a walking pace,

in tracks that are as even as possible.

For gap-free mowing, the tracks should

always overlap by a few centimetres.

• Adjust the cut height so the equipment

is not overloaded. Otherwise, the mo-

tor may be damaged.

• On slopes, always work across the

slope. Take particular care when going

backwards and pulling the equipment.

• Clean the equipment after each use,

as described in the chapter on “Clean-

ing, Maintenance and Storage”.

Switch off the equipment after work

and in order to transport it, discon-

nect the plug and wait until the blade

stops. There is a risk of injury.

Cleaning, Maintenance

and Storage

Have work that is not described in

these instructions carried out by a

customer service centre that we have

authorised. Use only original parts.

Wear gloves when handling the

blade.

Switch off the equipment before all

maintenance and cleaning work,

disconnect the plug and wait until

the blade stops.

There is a risk of injury.

General Cleaning and Mainte-

nance Work

Do not hose down the lawnmower

with water.

• Always keep the equipment clean. To

clean, use a brush or cloth but no de-

tergent or solvent.

• After mowing, use a piece of wood

or plastic to remove adherent plant

remains from the wheels, ventilation

holes, ejection hole and blade area.

Do not use hard or pointed objects, as

these may damage the blade.

• Oil the wheels from time to time.

• Before each use, check the lawnmow-

er for obvious defects such as loose,

worn or damaged parts. Check that

all nuts, bolts and screws are sitting

rmly.

• Check the covers and protective de-

vices for damage and check that they

are sitting correctly. Replace them if

necessary.

Changing the Blade

If the blade is blunt, it can be sharpened

by a specialist workshop. If the blade

is damaged or showing signs of imbal-

ance, it must be replaced (see chapter on

“Spare Parts”).

1. Turn the equipment over.

2. Use sturdy gloves and hold the

blade (18) rmly. Turn the blade

screw (17) anticlockwise off of

the motor spindle (19) using a

screwdriver.

3. Install the new blade (18) in the re-

verse order. Ensure that the blade

(18) is positioned correctly and the

screw (17) tightened rmly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly ERM 1030 G in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly ERM 1030 G Manual

Product: