Manual Grizzly ERM 1030 G (page 40 of 120) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

505424

Zoom out

Zoom in

1/120

wearing open sandals.

• Before each use, carry out a visual in-

spection of the equipment. Do not use

the equipment if protective devices

(e.g. collision guard or grass bag),

parts of the cutting device or bolts are

missing, worn or damaged. To avoid

imbalance, damaged tools and bolts

are to be replaced only in sets.

• Take care with equipment that has

several cutting tools, as the move-

ment of one blade may result in the

rotation of the other blades.

• Use only spare parts and accessories

supplied and recommended by the

manufacturer. The use of non-original

parts will immediately invalidate the

guarantee.

Working with the Equipment:

Do not place feet or hands near or

under rotating parts when working.

Risk of injury!

Observe the noise protection and

local regulations. The use of the

equipment may be restricted or

prohibited on certain days (e.g.

Sundays and public holidays), at

certain times of day (lunchtimes,

nighttimes) or in certain areas (e.g.

health resorts, hospitals etc.).

• Switch on the motor according to the

instructions and only when your feet

are at a safe distance from the cutting

tools.

• Do not use the equipment in the rain,

in poor weather, in a damp environ-

ment, or on wet grass. Work only in

daylight or with good lighting.

• Do not work with the equipment when

tired, lacking concentration or under

the inuence of alcohol or drugs. Al-

ways take breaks in good time. Take a

sensible approach to the work.

• When working, ensure a rm stance,

particularly on slopes. Always work

across the slope, never upwards or

downwards. Take particular care when

changing the direction of travel on the

slope. Do not work on excessively

steep slopes.

• Run the equipment only at a walking

pace. Take particular care when turn-

ing the equipment around, pulling it

towards you or going backwards.

• Switch on the equipment carefully and

in accordance with the directions in

these instructions. Ensure sufcient

distance between feet and the rotating

blades.

• Do not tilt the equipment when start-

ing other than if it is necessary to do

so when starting up in long grass. In

this case, tilt the equipment by press-

ing down the handle bar such that

the front wheels of the equipment are

raised. Always check that both hands

are in the working position before re-

turning the equipment to the ground.

• Do not work without the grass box or

collision guard. Keep away from the

ejection hole at all times.

Caution! Danger! The blade contin-

ues to run after switching off.

There is a risk of injury.

• The equipment is not to be lifted or

transported while the motor is running.

Switch off the equipment if it has to be

tilted in transit, when crossing surfaces

other than grass, and when the equip-

ment is being transported to and from

the surfaces to be mowed.

• Always keep the grass ejection hole

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly ERM 1030 G in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 11,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly ERM 1030 G Manual

Product: