Manual Grizzly EKS 2200 QT (page 152 of 200) (English, German, Dutch, French, Italian, Polish, Portuguese)

505400

152

Zoom out

Zoom in

1/200

152

cleaned thoroughly, in particular the

teeth of the rail. Use a whisk and a dry

cloth for that.

• Oil the individual chain links with the

aid of an oil suction gun with pinpoint

tip (available in the specialist trade).

Place individual oil drops onto the ar-

ticulated links and onto the tooth tips of

the individual chain links.

Sharpening the saw chain

 

chain increases the danger of

spring-back!



you are handling the chain or the

chain bar.

A sharp chain guarantees an optimal

cutting performance. It eats effort

lessly through the wood and leaves

large, long wooden chips. A saw

chain is blunt if you have to press

the cutting equipment through the

wood and the wooden chips are

very small. In the case of a very

blunt saw chain, no chip cuttings

result at all, only sawdust.

• The sawing parts of the chain are the

cutting elements, which consist of a cut-

ting tooth and a depth limiting projection.

The vertical separation distance between

these two determines the sharpness

depth.

• The following values must be noted in

sharpening the cutting teeth:

- Sharp edge angle (30°)

- Breast angle (85°)

- Sharpness depth (0.65 mm)

- Round le diameter (4.0 mm)

 -

ment data of the cutting geom-

etry can lead to an increase of

the spring-back slope of the

machine. Increased danger of ac-

cident!

Special tools are necessary for sharpen-

ing the chain, which guarantee that the

cutting edges are sharpened at the cor-

rect angle and to the correct depth. For

the inexperienced user of chainsaws,

we recommend to have the saw chain

sharpened by a specialist or a specialist

workshop. If you think yourself capable of

sharpening the chain, you can acquire the

special tools in the specialist trade.

1. Switch the saw off and unplug it from

the mains.

2. Remove the saw chain (refer to the

section on operating the saw). The

chain should be well-tensioned to en-

sure proper sharpening.

3. For the sharpening, a round le with

4.0 mm diameter is necessary.

Other diameters damage the

chain and can lead to danger



4. Sharpen only from the inside to the

outside. Guide the le from the inner

side of the cutting teeth to the outer

side. Lift the le when you are with-

drawing it.

5. Sharpen rst the teeth on one side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly EKS 2200 QT in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 5,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly EKS 2200 QT Manual

Product: