Manual Grizzly EHS710-69R (page 106 of 136) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

505387

106

Zoom out

Zoom in

1/136

106106

Care of Free-Growing Hedges:

Free-growing hedges are not shaped when

cut, although they must be regularly main-

tained so the hedge does not become too high.

Cutting Times

Deciduous hedges June and October

Hedges of coniferous wood April and August

Evergreen conifer hedges from May

Maintenance/Cleaning

Repair and servicing work not de-

scribed in this manual should always

be carried by our Service Centre.

Use only original parts.

Pull out the power plug before carry-

ing out any work on the equipment.

Wear gloves while handling the

blades.

Carry out the following maintenance and

cleaning work regularly. This will guarantee

a long and reliable service life.

•

Before each use, check the hedge trim-

mer for obvious defects such as loose,

worn or damaged parts. Check the se-

cure seating of the bolts in the cutter bar.

• Do not use the unit if the blades are

blunt or worn. This will overstress the

motor and gearbox of the machine.

• Check coverings and safety devices for

damage and correct seating. Replace

these where necessary.

• Keep the ventilation slots and motor

housing of the device clean. Use a

damp cloth or a brush to do this. Do

not wash down the equipment with wa-

ter, or submerge it in water.

• Do not use any cleaning agents or sol-

vents. These could cause irreparable

damage to the equipment. Chemical

substances can attack the plastic parts

of the equipment.

•

Clean the cutter bar carefully after each

use. Wipe it off with an oily cloth or

spray it with a metal protective spray.

Storage

• Keep the trimmer in the blade guard

supplied, in a dry place and out of

reach of children.

To hang the equipment on the wall

as desired, either directly or with

the blade protection, there are two

holes each on the blade holder

contact protection guard (1) and on

the blade protection (11).

To install, use the two screws and

wall plugs provided.

Disposal,

environmental

protection

Be environmentally friendly. Return the tool,

accessories and packaging to a recycling

centre when you have nished with them.

Do not dispose of electrical appli-

ances in household waste.

• Return the tool to a recycling centre.

The plastic and metal parts used can

be separated and sorted for recycling.

Ask our service centre for details.

• To dispose of the packaging, place the

box with waste paper. Dispose of pla-

stic parts in the dual system.

• We will dispose of your defective

equipment sent in, free of charge.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly EHS710-69R in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 5,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly EHS710-69R Manual

Product: