627349

Grizzly BRM 41-125 BSA Manual

94
Zoom out
Zoom in
Previous page
1/152
Next page
UK
94
Troubleshooting
Problem
Possible Cause Fault Correction
Engine does not
start
Toolittlepetrolinthetank Fillwithpetrol
Incorrectstartingsequence
Followtheinstructionsforstartingthe
engine(see”operation“)
Sparkplugconnector(
14)
notputoncorrectly
Sootedsparkplug
Attachthesparkplugconnector
Clean,adjustorreplacethesparkplug
(see“cleaningandmaintenance“)
Incorrectlyadjustedcarburettor
mix
Havethecarburettoradjustedbya
specialistworkshop
Engine starts but
equipmentdoes
not run at full
power
Dirtyairlter(
10)
Replacetheairlter(see“cleaning
andmaintenance“)
Incorrectlyadjustedcarburettor
mix
Havethecarburettoradjustedbya
specialistworkshop
Gaslever(
23)not in cor-
rectposition
Gasleverinposition (see
„Operation“)
Enginesplutters,
stops
Incorrectlyadjustedcarburettor
mix
Havethecarburettoradjustedbya
specialistworkshop
Sootedsparkplug(
14)
Clean,adjustorreplacethesparkplugs
(see“cleaningandmaintenance“)
Engine overheats
Ventilationholesblocked Cleantheventilationslot
Incorrectsparkplug(
14)
Changethesparkplug
Too little engine oil in the engine
Fillwithengineoil(see“initialopera-
tion”)
Drive does not
switchon
Bowdencables(
29)misad-
justed
AdjusttheBowdencablesorhave
themadjustedbyaspecialistwork-
shop
Outputunsatis-
factoryorengine
labouring
Grasstooshortortoolong
Changethecuttingheight(see“set-
tingthecuttingheight“)
Blade blunt
Havethebladesharpenedorre-
placedbyaspecialistworkshop
Bladeblockedwithgrass,grass
collection box full (
19),ejec-
tionchannelblocked
Removethegrass(see“cleaning
andmaintenance“)
Blade does not
turn
Bladeblockedwithgrass Remove the grass
Bladenotinstalledcorrectly
Havethebladeinstalledbyaspecial-
istworkshop
Abnormalnoises,
rattling or vibra-
tions
Bladenotinstalledcorrectly
Havethebladeinstalledbyaspecial-
istworkshop
Blade damaged
… 94 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly BRM 41-125 BSA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly BRM 41-125 BSA in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info