627206
76
Zoom out
Zoom in
Previous page
1/128
Next page
76
GB
environments is prohibited.
The operator or user is liable for acci-
dents, injury to humans or damage to their
property.
The manufacturer shall not be liable for
damages caused by non-intended or inap-
propriate operation.
Starting up
After turning off the appliance,
the blades will keep moving for a
short while. Allow the blades to
come to a halt, do not touch the
moving blades and do not slow
them down. Risk of injury!
Read the safety instructions be-
fore starting the appliance. Do not
operate the appliance without the
hand guard. To operate the appli-
ance, wear suitable clothing, work
gloves as well as head, eye and
ear protection. Prior to every use,
check that the appliance is opera-
tive. Only use OEM parts.
Beforeoperatingthedevice,youmustll
it with fuel.
Filling up
Ensure proper ventilation when
handling fuel. Do not smoke
when lling up and keep away all
heat sources. Do not ll up when
the motor is running or still hot.
Carefully remove the ller cap to
allow any excessive pressure to
relieve slowly. Do not start the
appliance near the place of ll-
ing up. Use suitable and admis-
sible vessels to keep the fuel in.
Non-compliance causes a risk of
re or explosion.
Use the fuel mixture recommended
in the manual only. Verify that it is
no older than 3 months. Non-com-
pliance may damage the motor and
your warranty will be voided..
Prevent petrol from coming into
contact with your skin and do not
inhale petrol fumes. Health risk!
The appliance runs on a 40:1
mixture of unleaded petrol
and two-stroke engine oil (API
TC quality).
Table of fuel mixtures:
Petrol Grizzly two-stroke oil
3,00 litres 75 ml
4,00 litres 100 ml
5,00 litres 125 ml
Mixing
40 parts of petrol + 1 part
of oil
• Donotuseundilutedfuel.Onlyuse
two-stroke oil (no four-stroke oil or oil
for water-cooled engines). Non-com-
pliance may damage the motor and
your warranty will be voided.
1. Prepare the petrol/oil mixture in a
clean canister intended for use with
petrol.
2. Firstllinhalfofthepetrol,thenall
of the oil, then shake the canister. Fill
in the rest of the petrol and shake the
canister again.
3. Removethellercapandllthefuel
mixture into the petrol tank. Wipe
spilledfuelfromaroundthelleropen-
ingandreplacethellercap.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly BHS 2670 E2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly BHS 2670 E2 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 21,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info