627202

Grizzly ART 2420 Lion Set Manual

28
Zoom out
Zoom in
Previous page
1/148
Next page
28
GB
• Do not operate the equipment in the
vicinity of inammable liquids or gases
as this could give rise to the danger of
a re or explosion.
• Store the equipment in a dry place that
is not accessible to children.
CAUTION! The following states how
damage to the equipment and possi-
ble injury to people can be avoided:
Taking care of the equipment:
• Ensure that the ventilation openings are
not clogged.
• Only use spare parts and accessories
that have been supplied or recommend-
ed by the manufacturer.
• Never try to repair the equipment your-
self. All work that has not been listed in
these Instructions must only be carried
out by an authorised servicing agency.
• Treat the equipment with the greatest
care. Always keep the equipment clean
for better and safer work. Follow the
maintenance instructions.
• Never overload the equipment. Always
work within the stated capacity range.
Do not use low-power machines for
heavy-duty work. Do not operate the
equipment for purposes for which it is
not intended.
• Always inspect the equipment before it
is to be used. Do not operate the equip-
ment if safety devices, parts of the cut-
ting device or bolts are missing, worn
out or damaged.
Electrical safety:
CAUTION! The following states how
to avoid accidents and injuries due
to electric shock:
• Before each usage, check the mains
power cable and the extension cable
for damage and signs of aging. Do not
use the device if the cable is damaged
or worn. Damaged mains power cables
increase the risk of electric shock.
• Always keep the extension cable well
away from the cutting tools.
Should the power cable become
damaged during work, then instantly
disconnect the power cable from the
mains. DO NOT TOUCH THE POWER
CABLE BEFORE IT HAS BEEN DIS-
CONNECTED FROM THE MAINS!
Risk of electric shock.
• If the power cable for this equipment
is damaged, it must be replaced with a
special power cable, which is available
from the manufacturer or a customer
service agent of the same.
• Check that the mains voltage is the
same as indicated on the rating plate.
• Wherever possible connect the equip-
ment to a power socked with a residual-
current circuit breaker that has a rated
current of not more than 30 mA.
• Protect the equipment from moisture.
The equipment must not be moist nor
operated in a moist environment. Water
entry into the equipment increases the
risk of electric shock.
• Avoid body contact with earthed parts
(e.g. metal fences, metal posts). There
is an increased risk of electric shock if
your body is earthed.
• Only use extension cables with a
maximum length of 75 m that have
been approved for open-air use. The
stranded cord diameter of the exten-
sion cable must be at least 2.5 mm
2
.
Always unreel a cable drum to its full
length so that the entire cable can be
inspected for damage.
• Never pass an operating equipment
over the extension cable. Ensure that
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly ART 2420 Lion Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly ART 2420 Lion Set in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 9,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info