505382
13
Zoom out
Zoom in
Previous page
1/17
Next page
13
SECTION 4 - CHECKS AND SERVICING
4.1 - OPERATING FAULTS
The machine may not work because:
- the plug has not been inserted into the mains socket;
- the mains switch has not been pressed;
- the filters are blocked;
- there is no water in the tank (MINIGRIMAC -T);
- there is an obstruction to the mains water supply (MINIGRIMAC -M).
If the above operations have been carried out and the filters are clean
(see 5.1) the machine must be faulty and should therefore be checked by
one of our service centres.
WARNING! Before removing the guards, ALWAYS remove the plug
from the mains socket. Never place hand or objects in the machine
when it is still connected to the power supply.
4.2 - GENERAL SERVICING
POWER CABLE
Check the power cable regularly
and replace if it is worn or
damaged.
Remove the plug from the mains
socket. Remove the wires from
the terminal (located inside the
machine).
Loosen the 3 screws that fix the
terminal to the machine.
Remove the worn cable,
reconnect the wires in the
manner indicated in the drawing.
Reconnect the wires to the
terminal.
Refit the terminal and tighten the
3 terminal screws.
This operation should be
carried out by an authorised
person.
L
N
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grimac Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grimac Mini in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info