819460
10
Zoom out
Zoom in
Previous page
1/55
Next page
10 GB/IE/NI
Piezo ignition
Knob Burner
1+2Main burners
3+4High-power burners
5Side burner [;]
Icon Meaning
Big flame
Small flame
1. Rotate all knobs to the OFF position.
2. Open the valve on the gas bottle.
3. Press and hold the knob (1). Rotate the knob to
the left up to the position. The ignition occurs
automatically. A clicking sound indicates that
the product is igniting. If the flame does not
burn upon the first try, repeat the process 4 to
5 times until the flame is burning.
4. Optional: Proceed as described above to
ignite the other burners with knobs (2), (3),
(4) and (5).
5. Set the desired temperature according to the
scales on the knobs.
INFO: Allow the product to pre-heat for
approx. 15 minutes before adding food to
achieve better cooking results.
Burn-in technique
m DANGER! Risk of fire! Risk of injuries!
Risk of burns!
Do not spray the oil directly onto the main
burners, the high-power burners and the side
burner [;].
Do not leave the product unattended at all
times during the burn-in process. Switch o all
burners and let the product cool down before
leaving the product.
INFO:
Carry out the burn-in technique to clean the
internal parts and to burn o any residues
caused by manufacturing.
Use heat-resistant oil (e.g. canola oil or
sunflower oil).
1. Remove the following parts from the product
(Fig. Z3):
Warming rack [2]
Flame diusers [3]
High-power burner flame diusers [4]
Grate [9]
Cast iron grill grate [!]
Grate with grill-in-grill system ["]
2. Spray the inside of the product with oil. It is
important to spray the internal area of the
burner housing with lid [1] (Fig. Z3).
3. Wipe the inside of the product with a cloth
or towel on all the places where the oil has
been sprayed. Thoroughly wiping the oil into
the product is important to make sure the oil is
spread around the whole area.
4. Spray the following parts with oil:
Warming rack [2]
Flame diusers [3]
High-power burner flame diusers [4]
Grate [9]
Cast iron grill grate [!]
Grate with grill-in-grill system ["]
Thoroughly rub the oil into the components.
5. Reinsert the components from step 1 [2] [3]
[4] [9] [!] ["] back into the product. Close the
burner housing's lid [1].
6. Open the lid [1]. Slowly switch on one burner
to a low setting.
01_407126_2207_GB.indd 1001_407126_2207_GB.indd 10 8/11/2022 11:42 AM8/11/2022 11:42 AM
Z4
[;]
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grillmeister HG 09946 - IAN 407126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grillmeister HG 09946 - IAN 407126 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 7.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info