RCA Stereo Line Input
Connect from the output of your tape deck, stereo receiver, VCR, etc., to the PowerWave
Line Input.
USB connection
Connect to your Macintosh or Windows computer, using the supplied cable.
AC power connection
Standard AC power. Note: AC power is only necessary when using the PowerWave as an
amplifier. It is not necessary for standard Input and Output.
Mini-jack Input
Stereo mini-jack connection for standard computer microphones and some input devices.
Mini-jack Output
Stereo mini-jack headphone connection
Active USB hub connection
Powered USB pass-through hub for connecting additional USB devices.
CONNECTING THE POWERWAVE TO A COMPUTER
Connect one end of the included USB cable to the PowerWave’s USB port and the other
to the USB port on your computer. The next steps depend on how you want to use the
PowerWave.
INPUT
ß Stereo receiver, tape deck, CD player, etc. - Connect RCA stereo cables from
the outputs of your device to the RCA Input ports on the back of the PowerWave.
ß Microphone - Connect the microphone plug to the Mic (mini-jack stereo) input
on the front of the PowerWave
OUTPUT
ß Stereo receiver, tape deck, etc. - Connect RCA stereo cables from the RCA
outputs on the back of the PowerWave to RCA inputs on your device.
ß Headphones - connect headphones to the mini-jack stereo Headphone port
ß Apple Pro Speakers - connect Apple Pro Speakers to the Speaker Breakout jack
ß Unpowered Speakers - attach your speakers to the Speaker Breakout Cable, and
plug that into the Speaker Breakout port.
USB
ß Powered hub – connect any USB device (such as the Griffin PowerMate) to the
PowerWave through its pass-through USB port.