Manual Greenworks GD80LM46 - 2501007 (page 7 of 208) (All languages)

708291

Zoom out

Zoom in

1/208

English (Original Instructions)

DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET

REPLACING THE CUTTING BLADE

See gure 11-12.

NOTE: Only use authorised replacement blades. Replace

worn or damaged blades and bolts in sets to preserve

balance.

■ Stop the motor and remove the battery key. Allow

blade to come to a complete stop.

■ Remove the battery pack.

■ Turn the mower on its side.

■ Wedge a block of wood between the blade and mower

deck to prevent the blade from turning.

■ Loosen the blade bolt by turning it counterclockwise

(as viewed from bottom of mower) using a 27 mm

wrench or socket (not provided).

■ Remove the blade bolt and blade.

■ Place the new blade on the shaft. Ensure blade is

properly seated with shaft going through center blade

hole and the two blade posts on the fan inserted into

their respective holes on the blade. Make sure it is

installed with the curved ends pointing up toward the

mower deck and not down toward the ground. When

seated properly, the blade should be flat against the

fan.

■ Thread the blade bolt on the shaft and finger tighten.

■ Torque the blade bolt down clockwise using a torque

wrench (not provided) to ensure the bolt is properly

tightened. The recommended torque for the blade bolt

is 62.5~71.5 kgfcm (350-400 in.-lb.).

ENVIRONMENTAL PROTECTION

■ Environmental protection should be a priority of

considerable importance when using the machine,

for the benefit of both social coexistence and the

environment in which we live. Try not to cause any

disturbance to the surrounding area.

■ Scrupulously comply with local regulations for the

disposal of packaging, deteriorated parts or any

elements with a strong environmental impact; this

waste must not be disposed of as normal waste,

it must be separated and taken to specified waste

disposal centres where the material will be recycled.

■ Scrupulously comply with local regulations for the

disposal of waste materials after mowing.

■ At the time of decommissioning, do not pollute the

environment with the machine, but hand it over to a

disposal centre, in accordance with the local laws in

force.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks GD80LM46 - 2501007 in the language / languages: All languages as an attachment in your email.

The manual is 15,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Greenworks GD80LM46 - 2501007 Manual

Product: