Manual Greenworks GD60HT - 2203407 (page 3 of 143) (All languages)

708302

Zoom out

Zoom in

1/143

English (Original instructions)

DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET

position.

 Remove battery pack from the hedge trimmer.

USING THE ROTATING REAR HANDLE

See figure 4.

 Place the hedge trimmer on a flat and even surface.

 Make sure that you released the trigger.

 Pull the rotation lever (8) and begin turning the rear

handle. Release the rotation lever and turn the

handle 45 or 90 degrees to either side until it clicks

into place and the lever locks in.

 To turn the handle back to center, pull the rotation

lever again, turn the handle slightly, release the

rotation lever and continue turning the handle until

it locks into place.

OPERATING TIPS

 Do not force the hedge trimmer through heavy

shrubbery. This can cause the blades to bind and

slow down. If the blades slow down, reduce the

pace.

 Do not try to cut stems or twigs that are larger than

15 mm thick, or those obviously too large to feed

into the cutting blade. Use a non-powered hand saw

or pruning saw to trim large stems.

 If desired, you can use a string to help cut your

hedge level. Decide how high you want the hedge.

Then, stretch a piece of string along the hedge at

this height. Trim the hedge just above this guide line

of string. See Figure 5. Trim the side of a hedge so

that it will be slightly narrower at the top. See Figure

6. More of the hedge will be exposed when shaped

this way, and it will be more uniform. If blades do

become jammed, stop the motor, allow the blades to

stop and remove the battery pack before attempting

to remove the obstruction.

 Wear gloves when trimming thorny or prickly

growth. When trimming new growth, use a wide

sweeping action, so that the stems are fed directly

into the cutting blade. Older growth will have thicker

stems and will be trimmed easiest by using a

sawing movement.

DANGER

If blade jams on any electrical cord or line, DO

NOT TOUCH THE BLADE! IT CAN BECOME

ELECTRICALLY LIVE AND VERY DANGEROUS.

Continue to hold the hedge trimmer by the insulated

rear handle or lay it down and away from you in a

safe manner. Disconnect the electrical service to

the damaged line or cord before attempting to free

the blade from the line or cord. Failure to heed

this warning will result in serious personal injury or

possible death.

WARNING

Clear the area to be cut before each use. Remove

all objects such as cords, lights, wire, or string which

can become entangled in the cutting blade and

create a risk of serious personal injury.

WARNING

Avoid using solvents when cleaning plastic parts.

Most plastics are susceptible to damage from

various types of commercial solvents and may be

damaged by their use. Use a clean cloth to remove

dirt, oil,grease, etc. When servicing use only identical

Greenworks Tools replacement parts. Use of any

other parts can create a hazard or cause product

damage.

CAUTION

Do not at any time let brake uids, gasoline,

petroleum based products, penetrating oils, etc.,

come in contact with plastic parts. They contain

chemicals that may damage, weaken, or destroy

plastics.

MAINTENANCE AND REPAIR

BLADE MAINTENANCE – HEDGE TRIMMER

WARNING

Battery units do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. To prevent serious personal

injury, always remove the battery and take extra

precautions and care when performing maintenance,

service or for changing the cutting blade.

WARNING

To prevent serious personal injury, remove the

battery pack before servicing, cleaning, or removing

material from the unit.

BLADE CARE

 Lubricate the cutting blades after each use.

 Periodically inspect the blades for damage and

wear.

 Always use the manufacturer's specified

replacement blades.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks GD60HT - 2203407 in the language / languages: All languages as an attachment in your email.

The manual is 7,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Greenworks GD60HT - 2203407 Manual

Product: