644667
7
Zoom out
Zoom in
Previous page
1/36
Next page
SAFETY INFORMATION
SAVE THESE INSTRUCTIONS
77
• Do not disassemble charger, take it to an authorised service station if repair is required.
Incorrect reassemble may result in a risk of electric shock or re.
• Unplug charger from outlet before attempting any cleaning to reduce the risk of electric shock.
• Disconnect charger from the power supply when not in use to prevent damage to the charger
during a power surge.
• Do not expose machine to rain or wet conditions. Water entering charger will increase the risk
of electric shock.
• Make sure cable is located so that it will not be stepped on, tripped over, come in contact with
sharp edges or moving parts or otherwise subjected to damage or stress. This will reduce the
risk of accidental wash, which could cause injury, and damage to the cable, which could result
in electric shock.
• Keep cable and charger away from heat to prevent damage to housing or internal parts.
• Do not let gasoline/petrol, oils, petroleum-based products, etc. come in contact with plastic
parts. They contain chemicals that can damage, weaken, or destroy plastic.
• An extension cable should not be used for the charger unless absolutely necessary. Use of
improper extension cable could result in a risk of re and electric shock. If extension cord
must be used, make sure:
• That pins on plug of extension cord are the same number, size and shape as those of plug
on charger.
• That extension cord is properly wired and in good electrical condition.
W A R N I N G
If any parts are missing, do not operate unit until the missing parts are replaced. Failure to do
so could result in possible serious personal injury.
W A R N I N G
When transporting or servicing unit, always remove the key and battery.
W A R N I N G ( P R O P O S I T I O N 6 5 )
Some dust created by power sanding, sawing, grinding, drilling and other construction activities
contains chemicals known to the state of California to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemical: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially designed to lter out microscopic
particles.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 25272 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 25272 in the language / languages: English as an attachment in your email.

The manual is 4,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info