644665
24
Zoom out
Zoom in
Previous page
1/29
Next page
24
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The handle is not
in position.
The mower does
not start.
The mower cuts
the grass unevenly.
The mower is not
mulching properly.
The mower is hard
to push.
The mower
vibrates at higher
speed.
Carriage bolts are not seated
properly.
Cam handle is not tightened.
The extension cord is not
connected to the mower plug.
The extension cord is not
connected to the power source.
The control switch is defective.
The lawn is rough or uneven.
The cutting height is not set
properly.
Wet grass clippings are sticking
to the underside of the deck.
The grass is long, or the cutting
height is too low.
The rear of the mower housing
and the blade are dragging in
heavy grass.
The motor shaft is bent.
The blade is unbalanced.
Adjust the height of the handle and
makesure the carriage bolts are seated
properly.
Tighten cam handle.
Reconnect the cord, and use the cord
restraint to keep the cord close to the
switch.
Connect the extension cord to a live 120V
AC, 60 HZ AC receptacle.
Have motor control switch replaced by an
authorized service center.
Check the mowing area.
Move the wheels to a higher position.
Wait until the grass dries before mowing.
Raise the cutting height.
Stop the motor, disconnect the mower
from the power source, and inspect it
for damage. Repair the mower before
restarting. If the vibration persists, call the
toll-free helpline, at 1-888-909-6757.
Balance the blade by grinding each
cutting edge equally.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 25112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 25112 in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info