644658
16
Zoom out
Zoom in
Previous page
1/42
Next page
OPERATING YOUR CHAIN SAW
OPERATING THE CHAIN BRAKE (See Figure 9)
W A R N I N G
If the chain brake do not stop the chain immediately, or if the chain brake will not stay in the run
position without assistance, take the saw to an authorized service center for repair prior to use.
STARTING THE CHAIN SAW:
Make sure chain tension is at desired setting. Refer to Adjusting the Chain Tension in the
Maintenance of this manual.
Make sure the chain cover lock bolt is tight to the chain cover.
Make sure no objects or obstructions are in immediate vicinity which could come in contact
with the bar and chain.
Fit the battery pack into the chain saw (see figure 7).
Note: If the Chain Saw makes a rapid beeping sound when attempting to start the saw, the chain brake is
engaged. To start follow instructions above from the beginning.
Press and hold the on/off switch. This makes the switch trigger operational.
Press and hold the switch trigger, release the switch lock and continue to squeeze the switch
trigger for continued operation.
STOPPING THE CHAIN SAW:
NOTE: It is normal for the chain to coast to a stop once the trigger switch is released.
Release the switch trigger to stop the chain saw.
Upon release of the switch trigger, the switch lock will be automatically reset to the lock
position.
16
Fig. 8
On/Off switch
RUN
POSITION
Switch Trigger
Check the operating condition of the chain brake prior to each use.
Engage the chain brake by rotating your left hand around the front handle, allowing the back of
your hand to push the chain brake lever/hand guard toward the bar while the chain is rotating
rapidly. Be sure to maintain both hands on the saw handles at all times.
Reset the chain brake back into the RUN posi¬tion by grasping the top of the chain brake
lever/hand guard and pulling toward the front handle.
BRAKE
POSITION
Fig. 9-1
Fig. 9-2
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 20312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 20312 in the language / languages: English as an attachment in your email.

The manual is 16,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info