644726
21
Zoom out
Zoom in
Previous page
1/256
Next page
18
English(Original instructions)
EN
FR DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
WARNING:
Never work without chain lubrication!
To prevent dirt getting inside the tank, clean the oil tank
cap before opening. Check the contents of the oil tank
during sawing work by checking the oil gauge. Close
the oil tank cap tigh ly and wipe away any spills
Chain Brake
The integrated chain brake brings the saw chain to a
standstill within 1/10 of a second if:
- The chain brake in front is pushed to its forward
(engaged) position or during work with the chainsaw
with the back of the operators hand (due to a
kickback) pushing the chain brake forward, or
- The chainsaw is switched off by releasing the trigger
If the chainbrake is engaged (i.e. the chain brake guard
is pushed to the front) do not try to start the chainsaw or
actuate the trigger switch.
WARNING:
Before operating the chainsaw, always check
that the chain brake is in perfect working order
(by actuating the hand protection and releasing
the trigger). Have the machine repaired if braking
time is lengthened.
Mains connection
WARNING:
Before plugging in, check to see that the rated
mains voltage and mains frequency, as stated on
the rating label, match your power supply.
WARNING:
Prior to starting work, check the mains
connection cable and extension cable for
damage. Only use mains connection cables and
extension cables in perfect condition.
WARNING:
The electrical system to which the chainsaw
is connected should be equipped with a
differential current safety switch (with a
max. of 30mA release current).
It is advisable to use the cord retainer in the back handle
of the chainsaw to avoid accidental disconnection of the
power supply.
BEFORE OPERATION
In order to prevent kickback, please follow these safety
instructions:
Never cut with the tip of the chain bar! Be careful
when continuing cuts you are already working on!
Always start cuts with the chainsaw already running.
Make sure that the saw chain is always properly
sharpened.
Never cut through more than one branch at a time!
When lopping off branches, be careful not to touch
any other branches.
a) When cross-cutting, pay attention to trunks
standing very close to each other. If possible use a
sawing trestle.
Transporting the chainsaw
Before transporting the chainsaw, always remove
the plug from the power socket and slide the chain
cover over the bar and chain. If several cuts are to be
performed with the chainsaw, the saw must be switched
off between cuts.
Chain guard (Fig. 2)
The chain cover must be clipped onto the chain and bar
as soon as the sawing work has been completed and
whenever the machine has to be transported.
OPERATION
WARNING:
Wear eye, ear and body clothing protection while
using your saw. Ensure the oil tank is full before
use.
Releasing the chain brake
To be able to use the chainsaw again, the saw chain
must be unlocked, firstly switch off the saw release
the on/off switch completely and then pull the chain
brake back towards the back of the chainsaw until it
locks into place. The chain will now move when it is
switched on.
Holding he chainsaw (Fig. 8)
Always grip both handles with the thumbs and fingers
encircling the handles. Ensure that your left hand is
holding the handle so that your thumb is underneath.
Using the chainsaw
Always be sure of your footing and hold the chainsaw
firmly with both hands while the motor is running.
Felling a tree (Fig. 9)
When bucking and felling operations are being
performed by two or more persons at the same time,
the felling operation should be separated from the
bucking opera ion by a distance of at least twice the
height of the tree being felled. Trees should not be
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 20037 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 20037 in the language / languages: All languages as an attachment in your email.

The manual is 5,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info