Manual Greenlee DM-860A (page 9 of 76) (English, French, Spanish)

692254

Zoom out

Zoom in

1/76

DM-860A

Using the Features (cont’d)

•dBm-Ω: The reference impedance is displayed for 1 second after selecting the dBm function.

Momentarily press dBm-Ω to change the reference impedance. Refer to the “Speciﬁcations” section

for the available values.

Note: This is an AC voltage measurement calculated according to the formula

dBm = 20 x log (measured voltage / reference voltage

The reference voltage is the voltage that causes 1 mW of power to be dissipated in the selected

reference impedance.

•T1-T2: Press momentarily to select the desired temperature display: T1, T2, T1

, or T1-T2

•500000: Press and hold to toggle between 50,000 counts fast mode and the 500,000 counts high

resolution mode for DC voltage measurements.

•Intelligent Automatic Power Off (APO): To extend battery life, the meter shuts itself off after

approximately 17 minutes of inactivity. Inactivity occurs when buttons are not pressed or the selector

is not turned. The meter will not enter APO when there are signiﬁcant readings of over 10% of the

range or non-OL readings for resistance and continuity. To restore power, press SELECT, RANGE, ∆,

or HOLD or turn the selector to OFF and back on again. To disable this feature, press SELECT while

turning the meter on.

•Disabling the Beeper: Hold down the RANGE button while turning the meter on to temporarily

disable the beeper feature. Turn the selector to OFF and then back on to enable the beeper.

•Hz: Frequency can be measured in most voltage and current settings of the selector. Press SELECT

until “Hz” appears in the primary or secondary display, as desired. The sensitivity of the Line Level

Frequency function varies with measurement range. Refer to “Speciﬁcations.” Auto-ranging mea-

surements usually set the best trigger level. If the frequency reading becomes unstable or is blank,

press the RANGE button to select another trigger level.

•%4-20mA: This calculated value is one of three available options for the secondary display when

measuring DC milliamps. It is useful for 4-20 mA industrial process control loop applications. A

reading of 4 mA on the primary display gives a 0% reading on the secondary display, 12 mA gives

50%, 20 mA gives 100%, etc.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Greenlee DM-860A in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 9,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Greenlee DM-860A Manual

Product: