Manual Greenlee CS-8000 (page 9 of 48) (English, French, Spanish)

627692

Zoom out

Zoom in

1/48

CS-8000

Basic Operation (cont’d)

Using the Transmitter and Receiver as a Set

1. Connect a cord to the transmitter. Push and release the Power button.

2. Hold the receiver approximately six inches from the cord, and then push and release the

receiver’s Power/Signal Reset button. The Transmitter Signal Indicator will be a solid blue

oval. Relative Signal Strength display bars will appear on screen along with an audible signal

beep.

3. Push and release the Mode Selector button to toggle to “SEARCH MODE.” Moving the unit

back and forth or to and from the transmitter cord will demonstrate how the Variable Signal

Strength bars operate. The unit is set to “AUTO GAIN” so it will ﬁne tune, creating less range

but more deﬁnition as you get closer to the transmitter cord. The Variable Signal Strength

bars can be reset to full level at any time by pushing and releasing the Power/Signal Reset

button.

4. With all Variable Signal Strength bars displayed, push the up or down arrow, which will

change the display from “AUTO GAIN” to “MANUAL GAIN.” Push the down arrow to reduce

the number of Variable Signal Strength bars, or the up arrow to increase the number of

Variable Signal Strength bars. The signal will remain at the same setting until the unit is

reset using the Power/Signal Reset button.

5. Hold the Power/Signal Reset button down for approximately one second and then release,

which will switch the unit back to “AUTO GAIN.”

6. Push and hold the Power/Signal Reset button to turn the receiver off. Push and release the

Power button to turn the transmitter off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Greenlee CS-8000 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Greenlee CS-8000 Manual

Product: