NOTA : Toute la structure doit être enterrée parfaitement à niveau pour que les équerres soient au niveau du sol.
Les équerres métalliques centrales (EM1) se mettent dans la zone centrale (une moitié d’un côté et l’autre moitié de l’autre) et on les unit aux
colonnes avec des vis TM6 aux pièces PEU (avec 2 écrous TRU chacune, voir page 14). La partie la plus large de l’équerre métallique est
vers l’intérieur de la piscine et la partie la plus étroite à la verticale, pour pouvoir la fixer à la pièce PEU. Après les avoir placées et vissées, placer
les équerres métalliques extérieures (EM2) (2 gauches et 2 droites), avec des vis (T2) aux extrémités; les pièces d'union (PU) montées dans les
rainures des équerres (EM2), orientées vers le début des extrémités de chaque demi circonférence ( au point C’ ).
COLOCACIÓN DE LAS ESCUADRAS METALICAS ( EM1 ) Y ( EM2 ): NOTA:
Debe estar toda la estructura enterrada a nivel perfecto para que estas escuadras queden al nivel del suelo.
Las escuadras metálicas centrales (EM1) se colocan en la zona central (mitad a un lado y mitad al otro) uniéndolas a las columnas, por medio
de tornillos TM6, a las piezas PEU ( con 2 tuercas TRU cada una- ver pag 14 ). La parte más ancha de la escuadra metálica debe quedar hacia
el interior de la piscina y la parte más estrecha, vertical, para poderla sujetar a la pieza PEU. Una vez colocadas y bien atornilladas, se colocan
las escuadras metálicas exteriores (EM2) (2 izquierdas y 2 derechas), tambien con tornillos TM6, en los extremos y teniendo en cuenta que deben
quedar las piezas de unión (PU) que se colocarán en las ranuras de las escuadras (EM2) orientadas hacia el comienzo de los extremos de cada
media circunferencia ( en el punto C’ ).
ASSEMBLING THE METAL BRACKETS ( EM1 ) - ( EM2 ):
NOTE: The structure must be entirely buried and properly levelled, so that these brackets are at ground level.The central metal brackets
(EM1) are installed in the central area (half on one side and half on the other side), attaching them to the uprights by joining them with TM6
screws to parts PEU (using 2 TRU nuts each, see page 14).The widest part of the metal bracket should be placed nearest to the inside of the
pool, and the narrowest part should be vertical, in order to attach it to part PEU.Once these brackets are in place and firmly screwed on, fit the
outer brackets (EM2) (2 left and 2 right) onto the ends, also with TM6 screws, ensuring that the joining pieces (PU) to be fitted into the bracket
(EM2) slots face towards the point where the relevant half-circular pool end begins ( Point C’ ).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for GRE Haiti at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of GRE Haiti in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 5,14 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
