Manual Graupner Ultramat 18 - 6470 (page 24 of 92) (English, German, French)

637245

Zoom out

Zoom in

1/92

Contents

Chapter Page

1. Introduction 24

2. Warnings and safety notes, please read and observe! 25

3. General notes on using the charger 26

4. Recommended charge leads, polarity 27

5. Controls, using the charger, starting the charge process 27

6. Charge and discharge programs 28

7. Program flowchart 28

8. Selecting the charge program group 29

9. Using the charger for the first time 29

10. Starting the charge / discharge process 30

11. Nickel-Cadmium (Ni-Cd) charge programs 31

12. Nickel-Metal-Hydride (Ni-MH) charge programs 33

13. Lithium-Ion / Lithium-Polymer / Li-Mn / LiFePO

- charge programs 36

14. Lead-acid (Pb) charge programs 38

15. Screen displays, cycle data display 40

16. Monitor displays 40

17. Error messages, warnings 42

18. PC interface 43

19. Cleaning and maintenance 44

20. Notes on handling rechargeable batteries 44

21. Specification, Environnemental Protection Notes 45

Guarantee certificate Back cover

1. Introduction

Please study these instructions, reading them completely and attentively, before using

the unit for the first time. This will guarantee that you will be able to exploit all the

facilities of your new battery charger. The warnings and safety notes are particularly

important. Please store these instructions in a safe place, and be sure to pass them on

to the new owner if you ever dispose of the charger.

In the ULTRAMAT 18 you have acquired a mature product with an excellent performance. It

incorporates the latest semi-conductor technology, controlled by a high-performance RISC

micro-processor, to provide superior charging characteristics combined with simple operation

and optimum reliability. These features can normally be expected only from much more expensi-

ve units. The ULTRAMAT 18 represents a reliable method of charging sintered Nickel-Cadmium

(NC, Ni-Cd) packs, Nickel-Metal-Hydride (Ni-MH) batteries, Lithium-Polymer (Li-Po), Lithium-

Manganese (Li-Mn), Lithium-Ion (Li-Io) and LiFePO

(LiFe) batteries, and also lead-gel and lead-

acid (Plumbum: Pb) batteries These sealed, gas-tight batteries have proved excellent for our

purposes in RC models. They are mechanically robust, can be used in any attitude and are

generally highly reliable. They require no special measures for storage apart from protecting the

cells from becoming deep-discharged. The ULTRAMAT 18 can also be used to discharge your

batteries and balance the cells in a pack.

Note

It is important always to observe the charging instructions supplied by the battery manufacturer,

and to keep to the recommended charge currents and times Do not fast-charge batteries unless

the manufacturer states expressly that they are suitable for the high currents which flow during

these processes. When charging new batteries you may also encounter problems with

premature charge termination. Whenever you wish to use a new battery it therefore makes

sense to carry out a series of monitored test charges, so that you can check that the automatic

charge termination circuit works correctly and reliably with your packs, and charges them to full

capacity.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner Ultramat 18 - 6470 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner Ultramat 18 - 6470 Manual

Product: