637232

Graupner ULTRA TRIO PLUS 16 - 6469 Manual

49
Zoom out
Zoom in
Previous page
1/107
Next page
49
18. PC-Interface
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
* * * * E R R O R * * * * [ 1 ]
b a l . v o l t t o o h i .
If the charger detects an excessive cell voltage at the balancer
input, this error message appears.
The error message appears at the following voltages:
LiPo > 4.3 V, LiIo > 4.2 V, LiFe > 3.9 V, NiCd / NiMH > 2.0 V
This error message may also appear if the cells connected to
the charger are overcharged.
If the charger detects an excessively low cell voltage at the
balancer input, this error message appears.
The error message appears at the following voltages:
LiPo < 2.75 V, LiIo < 2.75 V, LiFe < 2.0 V, NiCd / NiMH < 0.1V
If this should occur, we recommend that you give the battery an
initial charge for example in the LiFe Program Mode for a few
minutes (max. fi ve minutes), which allows cell voltages down
to 2.0V without connecting the balancer plug.
Warning: it may be that the battery contains damaged cells,
and the battery pack must therefore be monitored very
closely while it is being recharged. As soon as the voltage
is high enough, for safety reasons the battery must always
be charged with the balancer plug connected (explosion
and fi re hazard!).
You can download the appropriate USB serial driver CP210x_Drivers.exe for this battery charger at
www.graupner.de product search 6466.
Install this driver fi rst. You will also need a USB cable.
Connect the USB lead to the charger and to a free USB port on your PC.
PC software can be downloaded at www.graupner.de or www.logview.info.
This software enables you to display battery curves and much more.
With the fi rmware upgrader software, fi rmware upgrades can be done by the user.
When starting in NiCD/NiMH balance mode, if the balancing
connector is not connected to the balancing port of the charger,
this error should occur.
While the balancing connector is connected to the balancing
port of the charger, if the balancing connector is disconnec-
ted from the balancing port of the charger during charge or
discharge, this error should occur.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
* * * * E R R O R * * * * [ 1 ]
b a l . v o l t t o o l o w
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
* * * * E R R O R * * * * [ 1 ]
o p e n b a l a n c e r
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner ULTRA TRIO PLUS 16 - 6469 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner ULTRA TRIO PLUS 16 - 6469 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info