467073
90
Zoom out
Zoom in
Previous page
1/117
Next page
Page 26/53
5. STEP CHARGE MENU SCREEN
5-1. STEP CAPACITY
- This mode is only for NiMH battery, which are discharge before charging. Never
charge full batteries in this mode. Use the temperature sensor for safety reasons.
- Set wanted charge capacity in each step.
- Step charge should be finished at the fourth step based on the selected capacity in
the fourth step.
Set max possible capacity which can be charged to battery.
If battery is 4300mAh and 4800mAh is charged, set 4900mAh ( 100mAh –
tolerance ).
- If you want three step charging, make sure to set same capacity in 2
nd
step and 3
rd
step, then, it should be jumped directly from 2
nd
step to 4
th
step.
- Value can be automatically set pressing the dial long as AUTO SETUP.
5-2. STEP CURRENT
- Set wanted charge current in each step.
- Value can be automatically set pressing the dial long as AUTO SETUP.
5-3. PEAK SENS
- Set peak sens voltage.
- The selected peak sens voltage is checked in each step.
5-4. CUT-TEMP
- Connect the temp sensor to battery, and charge is finished when it reaches the
selected temp.
- This function is likely to be used more to prevent battery pack from being
overheating rather than normal charge completion
5-5. TRICKLE CHG
- Set additional current after fast charging.
5-6. DISCHARGE
- Set whether discharge is first activated before step charging.
- If “ON” is set, discharge is done based on selected capacity (max selected
capacity) x 4C rate. It is limited to 10.0A if X4C rate is over 10.0A.
- Step charge is basically to charge full discharged battery pack, please make sure
to set “ON” always.
5-7. IMPULSE
- Set whether impulse operation is activated or no in 1
st
~ 3
rd
step.
- Impulse current : Selected current X 1.5 current should be delivered for 0.5 second
every 3 seconds. Ex) If 5A is set, 5.0A current for 2.5 seconds, and 7.5A for 0.5
second.
- This IMPUSE is to improve battery power.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner ULTRA DUO PLUS 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner ULTRA DUO PLUS 50 in the language / languages: German as an attachment in your email.

The manual is 3,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner ULTRA DUO PLUS 50

Graupner ULTRA DUO PLUS 50 User Manual - Dutch - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info