Manual Graupner S1006 - MZ-24 HoTT (page 5 of 108) (English)

637249

Zoom out

Zoom in

1/108

Touch

7. BINDING

8. TRANSMITTER PROGRAMMING SETUP

1. You must bind the receiver to the transmitter before the receiver will operate. Binding

teaches the receiver the specic code of the transmitter so that it will only connect to it’s

corresponding transmitter. If you turn on transmitter’s power before binding, the warning

message appears on transmitter LCD page, which announce transmitter is not bound. Touch

SET icon on warning pop up to access to Tx ctl (BIND)

2. After accessing to Tx ctl(BIND), Turn on receiver’s power and touch Bind button on receiv-

er for over 3 sec to enter binding mode. Touch OFF icon in the cross line of BIND ON/OFF

and RX1 then OFFs in the cross line of BIND ON/OFF and RX1, RF ON/OFF and RX1 are

changed to ONs indicating the system has been connected. If the binding process has failed,

repeat the whole procedure.

BASE MENU

Turn on transmitter’s power and touch B icon on the main page to access to BASE menu.

CAUTION

We strongly recommend to unlock the throttle limit function when you control Helicopter.

Throttle limit function restrict the travel amount of throttle with DV1 volume and this function

is set by default.Touch “BASE” icon at the main page to call “BASE” page and touch “CH

set” icon to call “CH set” setup page. Touch DV1 in channel 12 to call “Select” message

popup and touch CLR in popup then DV1 is switched to NONE. Now, throttle limit function is

unlocked.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner S1006 - MZ-24 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner S1006 - MZ-24 HoTT Manual

Product: