637253
26
Zoom out
Zoom in
Previous page
1/29
Next page
English
English
INNOVATION & TECHNOLOGIE
50 51
The battery temperature is higher than the set maximum tem-
perature.
The charger is overheated! Wait until it cools again! If the
error message is displayed permanently, please contact the
service.
No balancer connected.
The balancer has stated (cell number in parentheses) too high
cell voltage.
The balancer has stated (cell number in parentheses) too low
cell voltage.
The current of the connected motor is too high. Please check
your parameters.
The motor was stopped because the other output is in use.
Please check your parameters.
Errors in calibration or in the circuits of the device. If the error
message appears repeatedly, please contact the service.
The cell count in the menu charge / discharge and Sync Mode
menu does not match with the detected number of cells on
Channel 1 and Channel 2.
Troubleshooting
Problem Possible causes
When connecting the
charger the display
remains dark
Check that the external power supply meets the requirements of the
charger and that all cables are properly connected. If the problem per-
sists, contact the Service.
The charger does not
recognize the battery
Check whether the battery is properly connected to the charge port
and the balancer.
Check whether a cell of the battery is defective.
The battery voltage is
too low after charge
Check whether the charge settings are correct.
Check the set delta peak value of NiCd / NiMH batteries.
Check the connecting cable of the battery.
Discharge mode is not
retrieved
Check if the selected cell voltage matches the battery features.
Check whether a cell of the battery is defective.
Battery is not fully
charged after the maxi-
mum charging time
Charge the battery pack. Run a full cycle charge process by improving
the capacity (battery has been stored for too long or is consumed).
Check whether in the charge cycle, the minimum discharge voltage
correctly is set.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner POLARON EX-1400 - GR-S2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner POLARON EX-1400 - GR-S2018 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info