637253
8
Zoom out
Zoom in
Previous page
1/29
Next page
English
English
INNOVATION & TECHNOLOGIE
14 15
Operating elements
Back sightFront sight
3
4
5
1
2
7
Right side sightUpper sight
6
Nr. Description
11 Mini-USB connector for resource and rmware updates, see pages 46 and 47, and for
reading out data via PC or laptop using the “PC software” available for Polaron chargers
in the download area of the product.
12 USB charging plug 5V / 2.5A (Not suitable for connection of PC or Laptop!)
13 Connection for external modules, see page 41
14 Connection for sensors of brushless motors, see page 37
15 Connection for servo test function, see page 37
Commissioning
Connect the Graupner Polaron EX-1400 charger through the supplied cable to terminals on your
car battery with 12 or 24 V or alternatively to a suitable power supply with an output voltage of 12
... 28 V DC stabilized power and output power of at least 25 A.
The optional polaron PSU, Order Nr. S2012 has to be docked to the left side.
Remove the unit stand from the charger by rst pushing it forward gently and then remove it from
the bottom of the charger. Drag afterwards the unit base apart and, after connecting the power
supply plugs, insert it under both devices.
The power source and the charger will be connected through the black wire to the nega-
tive terminals (-) and the red to the positive (+)! The charger is indeed equipped with re-
verse polarity protection, so that incorrect insertion does not generate an immediate de-
struction of equipment. However, it cannot be started. Disconnect the power cable and then insert
it again with the correct polarity.
INSTRUCTIONS
Protect your power source, but especially your car battery, to the possibility of over-
loading by specifying corresponding limits in the second screen of the “Settings“ menu,
Nr. Description
1 3.0 "Color TFT LCD Touch Screen
2 LED indicators for charge / discharge
3 Push button to switch between CH1 and CH2
4 Charge / discharge status bar
5 Battery port
6 Balancer port
7 Port for temperature sensor
8 XT90 connector to connect the power supply to the charger
9 Fans
10 Lateral docking jacks for separately sold AC adapter, Order Nr. S2012
ATTENTION!
If the Graupner Polaron EX-1400 is connected through the XT90 connector, located
on the back, to an external power source, such as a car battery, there is current on the
other plugs, located on the side (red on the bottom front part and black on the upper back part).
Never connect these jacks one another!!!
Disconnect the docked Polaron power supply 12 V DC 25 A, Order Nr. S2012, from the charger
Polaron EX-1400 before you connect the charger to any other external power source. Other-
wise, the power supply load on the charger docking connection plugs will be added unnecessa-
rily to the external power source.
Never shortcircuit the two charge ports.
Never connect two separate, but interconnected to the negative poles battery packs, to both
charge ports.
12
13
14
15
8
9
10
10
11
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner POLARON EX-1400 - GR-S2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner POLARON EX-1400 - GR-S2018 in the language / languages: English as an attachment in your email.

The manual is 4,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info