747908
37
Zoom out
Zoom in
Previous page
1/48
Next page
37 / 48
S1024.mz32_V1.7_sh_en
upper and lower selecon keys
Menu lines in which parameters can be changed are indicated by
a preceding angle bracket (
). Tapping on the lower or upper
selecon buon moves this "
" pointer one line down or up.
Lines which cannot be navigated to cannot be changed.
middle "ENTER" buon
Tapping the central buon acvates or deacvates the value
field of a modifiable parameter.
As long as a parameter is displayed inversely, the selected value
can be changed with the upper or lower key within the possible
seng range.
"RECEIVER" buon
If a sensor was connected before switching on the relevant
receiver power supply, or if several sensors were connected to
the receiver, this is indicated by a green bar at the boom of the
display of the "telemetry" menu, as shown on the le.
To access the telemetry displays of these devices, open the "SET-
TING & DATAVIEW" display, then tap the value field labelled
"Receiver" in the lower right corner and select the desired device
in the selecon window that appears.
The operaon of these displays is the same as described above
under "funcon of the cross-shaped keypad".
Note
All sengs made via the Telemetrymenu in the receiver, such
as, fail-safe, servo reverse, end points adjustment, mixer and
curve sengs, etc. are stored exclusively in the receivers set-
ngs.
Most of these sengs can be made directly on the transmier
which is the proper way for seng up your model memories. In
case you chose to do this on the receiver you must reinialize
the receiver when installing into another model to avoid taking
over sengs that may not work with another model
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-32 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-32 HoTT in the language / languages: English as an attachment in your email.

The manual is 26,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-32 HoTT

Graupner MZ-32 HoTT User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info