747908
15
Zoom out
Zoom in
Previous page
1/48
Next page
15 / 48
S1024.mz32_V1.7_sh_en
Transmier switched off
Once the transmier is connected to a suitable USB power source
the charging process begins.
Depending on the current charge status of the transmier bat-
tery, the bezel of the ON / OFF switch will flash approximately
every 2 seconds in dierent colours and with varying frequency.
As soon as the bezel glows solid green, the baery is fully charged.
The charging process is complete.
Transmier switched on
Aer connecng the transmier to a USB power source, the cur-
rent display switches to the display shown on the le.
Tapping the le “Charge” field starts the charging process on a
suitable charger and tapping this field again or disconnecng the
USB cable stops the process.
Tapping the "USB" symbol in the upper le corner returns to the
original display, which means that the mz-32 HoTT transmier
can also be used "normally" during the charging process. Only
the red flash in the baery symbol in the upper right corner of
the display indicates that the charging process is sll running.
!
WARNING
The charger should always be supervised during charge and it
should be used only in rooms fied with a smoke detector.
Mass storage memory
If the mz-32 HoTT transmier is connected to a compable PC and
the "Mass storage" field is acvated by tapping, the memory of the
transmier can be accessed from the PC. For example, to copy
screenshots or model data from the transmier to the PC or MP3 or
soware updates to the transmier.
Note
Even if the transmier can no longer be switched on, the mass
memory can sll be accessed in special cases, see under "Forced
starng in the USB mode Mass storage step-by-step" in the secon
"Firmware update".
Joysck
As soon as the transmier is connected to a PC via the micro USB
port of the transmier and "JOYSTICK" is selected by tapping, the
connected PC recognizes the transmier as a joysck.
The standard seng suitable for the most flight simulators is 0% to
100 %.
COM Port
Serial interface for future use
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-32 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-32 HoTT in the language / languages: English as an attachment in your email.

The manual is 26,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-32 HoTT

Graupner MZ-32 HoTT User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info