637251
58
Zoom out
Zoom in
Previous page
1/77
Next page
- LIMIT + / -
The maximum value for each direction can be programmed so that the maximum servo
travel limit of the connected servo is adjusted. The default value is 150% but the servo
travel range is limited to 100% that is programmed at SERVO EPA of transmitter so the
servo limit is not operated at 150% ~ 100%, but operated at below 100%. If SERVO EPA of
transmitter is set to 150%, the LIMIT value can be set below 150%. Press DOWN button to
access to LIMIT+/- line then press ENT button to highlight the default value 150%.
Press UP/DOWN button to program the desired value and then press ENT button to remove
the highlight.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
- CENTER
The value of servo center in the selected channel at OUTPUT CH can be programmed. The
center value depends on transmitter throttle and trim position. General servo center value is
1500us. Press DOWN button to access to CENTER line then press ENT button to highlight
the default value 1500usec. Move and hold transmitter throttle at the desired position then
press ENT button, the center value corresponding to throttle position is set.
- TRIM
the servo trim can be set. Press DOWN button to access to TRIM entry then press ENT
button to highlight the default value -000usec. Press UP/DOWN button to program the desired
value and then press ENT button to remove the highlight.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press press
press
58
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-12 HoTT - S1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-12 HoTT - S1002 in the language / languages: English as an attachment in your email.

The manual is 13,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info