637251
39
Zoom out
Zoom in
Previous page
1/77
Next page
- Diff-red
Press the direction button to access the diff-red mixing then press the ENT button to high-
light the value. Press the direction button to adjust the desired value then press the ESC
button to remove the highlight.
8. heli mix (Helicopter)
The mz-12 offers the mixing function in Helicopter model type. Heli mix is connected to 2 quick link
function and the mixes are assigned to each quick link function.
Ptch : The ptch mixing allows to adjust 5 points of the pitch curve that corresponds to the throttle
stick to maintain the best ight condition. You can program the different pitch curve for each quick link.
Pitc-thro : pitc -> thro function allows to adjust 5 points of the throttle curve that corresponds to the
pitch angle for the throttle stick operation so that the engine or motor leads the best ight condition.
You can program the different throttle curve for each quick link.
Pitc-rudd : It is pitch rudder mixing. This function is used for offsetting the counter torque that is
generated by the pitch of the main rotor or the change of the motor/engine RPM in accordance with
the movement of the throttle stick. You can set the point at the position where the counter torque is
generated to program the rudder value. This mixing might not be necessary when the high perfor-
mance Gyro (Tail lock) or might be need to adjust the small value. You can adjust the different value
for each quick link.
Rudd-thro : This function is used to offset to fall down Helicopter engine RPM by the load that is
generated for rudd operation during Helicopter hovering. It can be offset with throttle channel.
Aile-thro : This function is used to offset to fall down Helicopter engine RPM by the load that is
generated for aile operation during Helicopter hovering. It can be offset with throttle channel.
Elev-thro : This function is used to offset to fall down Helicopter engine RPM by the load that is
generated for elec operation during Helicopter hovering. It can be offset with throttle channel.
Gyro : The gyro mixing allows to adjust the gyro gain. You can adjust the different gyro gain for
each quick link.
Swash lim : If the aileron and elevator related with the swashplate is simultaneously controlled, the
linkage connected to the servo might be damaged. The swash lim mixing allows to restrict the travel
range of the swash plate to prevent the damage of the linkage. It is typically used for 3D Helicopter.
Governor 8ch : This function is used to set governor ON/OFF
Governor rate : This function is used to set the value of governor operation.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
press
39
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-12 HoTT - S1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-12 HoTT - S1002 in the language / languages: English as an attachment in your email.

The manual is 13,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info